1 / 2
Ezemat 200w 10 M2 Underfloor Heating Mat
Description
Tiles don’t have to be cold underfoot thanks to the these incredibly efficient and easy to install underfloor heating systems from leading manufacturer Ezewarm.
Key Features
-
Incredibly easy to install
-
Even Heat Distribution
-
Thermostat sold separately
Ezewarm underfloor heating systems are incredibly easy to install and are available in a range of standard room sizes and wattage. Fitting is easy - the systems are simply inserted between floor finishes and only require an electrician for the final thermostat connection and overall system check. Silent and invisible, once installed the system can be used with almost any flooring finish including ceramic, porcelain, and natural stone.
- SKU 434605
- Weight 5.00 KG
- Watts Per SQM 200
- Total Watts 2000
Product Reviews
Sally S. 07/03/15
Verified Buyer
Matthew O. 02/03/14
Verified Buyer
Q & A
Ask A Question
Hilary 04/08/22
Can this be used with laminate flooring?
Our advice: We would only advise using water-based underfloor heating with our Laminate.
Adam 11/10/17
Can you confirm that this is 10m X 1m.
Our advice: We can confirm that The Ezemat 200w 10M2 underfloor heating mat measures 10m x 1m which equals to 10M2.
Adam 09/10/17
Looking to put this down under kitchen floor. Floor is concrete, with a polystyrene layer, with further concrete over the top. Would you think the insulation board is necessary? Any other tips?
Our advice: Insulation boards would be used on top of a concrete base to help stop the heat disappearing through the floor as opposed to through the tiles. If the poly layer that you currently have installed acts as insulation these may not be required. We would suggest seeking the advice of your builder or tiler.
sarah 29/09/17
Is this underfloor heating system suitable for a floor which is part floor boards covered in ply and part new concrete base. I plan to also use the permalayer anti fracture layer you recommend with quartz tiles already purchased from tile mountain.
Our advice: With a Quartz tile, we would recommend only using a 160-watt underfloor heating kit and this would have to be installed on one substrate only, we would recommend using a self-levelling compound (SKU: 0124325) over the two different floor areas to create a consistent area. We would also recommend installing the tiles using Keraquick (SKU: 012520) mixed with latex (SKU: 215106UK).