Add some industrial style to your home with the ultra-chic Etna range. Designed to mimic the effect of tarnished metallic panels, these large format tiles are ideal for instilling a timeworn aesthetic into any roomscape.
Key Features
Authentic replication of aged metallic panels
Hardwearing porcelain construction
Glitter sparkle that reflects light
Rectified edges
A great way to get an industrial, rustic or urban look in your home, the Etna range oozes character and faithfully replicates metal panels that have been subject to corrosion. Constructed from hardwearing porcelain and available in three colour variants, Etna can be combined with exposed pipework and brickwork to infuse kitchens and open-span areas with a stripped-back, industrial aesthetic.
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles
*Suitable matting should be in place to absorb water splashes etcR10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
Donald H. 15/04/20
Verified Buyer
Kate L. 05/05/19
Verified Buyer
Jake F. 10/04/19
Verified Buyer
allan b. 17/12/17
Verified Buyer
William S. 15/12/17
Verified Buyer
Brian 06/11/20
Is that 9kg per tile? So 27 kg per square metre? Customer is looking at them but they are plasterboard walls to stud making sure the weight cabability is OK thabks
Our advice: The weight of the Etna Anthracite is 8.98kg per tile.
Eve W. 15/11/18
Are these tiles suitable for wet underfloor heating systems?
Our advice: These tiles are suitable to use with wet underfloor heating systems.
Andy T. 19/12/17
I'm fixing these tiles to fresh plaster, do I need a primer?
Our advice: We would recommend priming fresh plaster with our Primer G - SKU: 020101.
Liz 06/11/17
Hi. As these tiles are semi polished, do they require sealing for protection?
Our advice: Our Etna Anthracite Porcelain Wall And Floor Tiles do not require sealing.
Leyla 01/11/17
Hi, are these suitable for bathrooms or wet rooms? Thank you
Our advice: Being a semi-polished tile, our Etna Rust Porcelain Wall And Floor Tile may not be suitable for a wet room scenario. We would always recommend ordering a sample to ensure that it is suitable for your project.