Tile Mountain

Fuschia Glass Upstand 2pcsx1000mmx140mm

SKU: 436380
sale price £34.99
£45.32
£34.99
inc VAT

IMPORTANT

Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack.

To prevent product failures ensure that: 

All fitting steps are completed.

A space of at least 2mm is left between the product and all surfaces.

The gaps must be filled with silicone.

The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting.

You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.

 

GLASS CUTTING

Glass can be cut by a suitably experienced professional. Specialist glass cutting tools should be used.

Glass must not be cut into pieces of less than 30mm wide neither should less than 30mm be trimmed from the splash back when cutting to size.

 

SAFE HANDLING OF GLASS

All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.

 

AFTER CARE

Do not use abrasive cleaners. For the best results use:

Hot water with a mild soap detergent.

 

BEFORE YOU START

Check that all components are present.

Ensure that you have all tools to hand.

 

TOOLS NEEDED TO FIT THE SPLASH BACK

Tape measure.

Sealant gun.

Silicone sealant - only use LM or AC.

2mm tile spacers.

 

CHECK LIST

Do you have everything you need to start the job?

Check that the splash back fits.

Ensure that your worktop is fitted securely.

Check that your worktop is level.

Clear all dust from the worktop.

Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions.

Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.

 

DO NOT

Fit the splash back directly onto a hob or work surface using spacers.

Place the splash back on its edge on any hard surface during the fitting process.

Use the product until the silicone has cured

(follow the manufacturer's instructions).

Product Details
  • SKU 436380
  • Weight 4.50 KG
  • Colour Pink
  • Finish Polished
  • Thickness in MM 6
  • Material Glass
  • Rectified No
  • Floor or Wall Wall
  • Box Quantity Yes
  • Spacers 3mm
  • Suitable for Underfloor Heating No

Product Reviews

No Reviews Found

No Questions yet