> Luxury high-end aesthetic
> Hardwearing porcelain construction
> Large format means fewer tiles used fewer grout lines
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles*Suitable matting should be in place to absorb water splashes etc
R10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
Mohan Chowdavalli 05/02/22
Laura V. 12/08/20
Caitlin R. 20/07/20
Amanda F. 06/05/20
Lorraine P. 01/02/20
Gillian C. 23/11/19
Gillian C. 23/11/19
Can I use this size on my walls
Our advice: Yes, this tile can be used on the wall.
Do these tiles need sealing ?
Our advice: The tiles do need to be sealed after installation. We recommend the MP90 Polished Porcelain sealer (SKU: 430670).
Do these tiles need sealing prior to fitting please?
Our advice: These do require sealing, we recommend using Fila MP-90, SKU: 436195.
Mrs Palmer 28/10/23
Hi reading on another page for the 600x600 size tiles in this range it recommends to use HardieBacker board would this be needed for 300x 600 size tiles ?
Our advice: No, a 300x600mm is perfectly suited for use on a wall without a backerboard, in the majority of cases. We would advise employing a qualified tradesperson to assess the wall prior to ordering.