> Fast-setting, cement-based
> Available in 20kg pack
> Suitable for external and internal use
> Designed for use with medium to large format floor tiles
> Can be used as internal and external levelling compound
natalie 04/06/23
Verified Buyer
Stephen 11/05/23
Verified Buyer
Roman Musteata 25/10/22
Verified Buyer
Denise Rejchel 08/08/22
Verified Buyer
Helena 20/06/22
Verified Buyer
Sam 12/06/22
We apologise you are unhappy with the product you have recieved. We have not encountered such problems previously and our customer service team would be happy to look into this further if you did wish to contact us.
Verified Buyer
Ian 09/06/22
Verified Buyer
Nicola 20/05/22
We are unable to accept any perishable items back for a refund outside the full returns period as we are unable to guarantee the conditions the items are being stored. If you did wish to discuss this further with a member of the team please contact us.
Verified Buyer
Brian 27/06/22
Do you have to have a cured concrete mortar base to use this? I have seen videos where the porcelain tile is laid onto wet mortar. An adhesive is still applied to the back of the tile. It will be a pain to wait 28 days for the mortar to cure. Is there perhaps an alternative product. Thanks
Our advice: This adhesive should be used when installing tiles onto a cured concrete base. If you don't have the timeframe to allow the curing time for concrete you could install the tiles onto a hardcore base and adhere the tiles with our Norcros Rock Tite system.
Karl 21/06/22
Hi how many bags would I need for 12msq
Our advice: You would need x3 bags.
Neil 07/06/22
Hi - just completing a patio with 20mm granite slabs 600 * 600 laid using backing slurry and sharp sand / cement mix base onto an MOT 1 compressed foundation, and planning to lay the same slabs onto two steps of cured concrete. What adhesive do you recommend please? The two steps form a partly covered entrance so they will not be fully exposed to the elements but will get some rainfall. Many Thanks
Our advice: This adhesive would be suitable for installing the slabs onto a stepped project.
Dan 27/04/22
Hi Iam laying large format 1mx1m 20mm thick porcelain pavers. 1) Do I need to prime the backs of the porcelain pavers first with another product or can I use this directly to bond. 2) what depth would you recommend for this size pavers - would this be 10mm or closer to 20mm?
Our advice: We would need to know which method of installation you are using. Could you please either call us on 01782 223822 or email us at customer.service@tilemountain.co.uk.
Gem 25/03/22
Hi, just wondering how many bags to order for 16sq meters
Our advice: You would require x4 bags.
Mick 07/03/22
What tile adhesive for underfloor heating
Our advice: We would advise using our Keraquick Grey Fast Setting Adhesive 20kg SKU: 012120UK.
Mike 23/05/21
What adhesive shall I use for 20 mm thick porcelain exterior tiles
Our advice: Assuming you are tiling onto a cured concrete base I would advise using our Adesilex P4 Grey Floor Adhesive 20kg SKU: 218220
The adhesive is a recommendation based on the average consumption. If a thicker bed of adhesive is used this can affect the amount used. If you would like to discuss this further with a member of the team please contact us.