FLOORING SALE - UP TO 25% OFF FROM £7.16 /SQM
Tile Mountain
Go to the top of page

Skyros Delft Grey Wall and Floor Tiles

Size 440x440x10mm
SKU: 438405
169 sqm In Stock
sale price £26.95 /m2
£29.95 /m2
calculations
How many do I need?
Top tip: Add extra for your cut pieces 7% Wastage Added
Add 7%
£5.22
inc VAT

Key Features

> Authentic, Mediterranean-style design

> Realistic encaustic patterns and faux distress lines replicate genuine Iberian tile style

> Hardwearing porcelain construction

> Randomised pattern combinations make for aesthetic variety

> Suitable for walls and floors

Description

Product Details
  • SKU 438405
  • Material Glazed Porcelain
  • Colour Grey
  • Thickness 10 mm
  • Anti-Slip Rating R9

    DIN 51130 shod Ramp Test

    R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.

    Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles

    *Suitable matting should be in place to absorb water splashes etc

    R10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.

    The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.

    R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.

    The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.

    R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits

    The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.

    R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits

    The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present

  • Finish Matt
  • Floor or Wall Both
  • Tiles Per Square Metre 5.17
  • Wear Rating 3
  • Rectified No
  • Suitable for Underfloor Heating Yes
  • Box Quantity 7
  • Weight 4.10 KG
  • Height 440
  • Width 440

Product Reviews

Andy Jones 03/08/23

Fast and efficient delivery and we like the sample tile. We will be ordering it for our hall

Verified Buyer

James 07/09/22

Cracking tiles. Delivered with care. 100%:would recommend.

Verified Buyer

Anonymous 17/05/22

Fantastic looking tiles that really suit our ensuite, lovely designs

Verified Buyer

Jackie 17/05/22

Verified Buyer

Guest 28/07/21

Terrible customer experience - delivery

Terrible customer experience - delivery four days late.

Verified Buyer

Anne-Marie K. 18/01/21

lovely 'Romanesque' effect

lovely 'Romanesque' effect

Verified Buyer

Megan P. 22/12/20

Look lovely in our little

Look lovely in our little downstairs w/c All different patterns look incredible

Verified Buyer

Sam K. 13/12/20

The tiles look amazing, Arrived

The tiles look amazing, Arrived in fantastic timing and the delivery was perfect can’t say any more I am absolutely in love with them. Thankyou so much I will be purchasing again from the Tile mountain.

Verified Buyer

Read More Reviews:

Kat 13/10/22

Are the tiles suitable for a wetroom

logo

Our advice: They are suitable for the installation. We would just advise considering a tile with a higher anti-slip rating. Normally an R11 or above.

Chris 18/05/22

Hello, I'm interested in the Delft tiles. I noticed the Grey have a wear rating of 3, whereas the Blue version have a wear rating of 4. I just wanted to check this is correct - so the Blue are more hard wearing than the grey? Many thanks Chris.

logo

Our advice: Yes, as strange as this sounds it is correct that these two tiles have different wear ratings.

Sarah 08/03/22

Hi can I order a sample

logo

Our advice: Yes, you can order either a cut or a full sample on our website. Please click on the sample button shown on the website. Alternatively, you can call us on 01782 223822

Laura 29/03/21

can these tiles be used as a decorative feature on an outdoor patio?

logo

Our advice: Yes, they are suitable. We recommend getting a sample to ensure that they are suitable for you.

Clare P. 13/12/20

Is there a best tile cutter/wheel to use for these porcelain tiles, in order to cut a crisp edge. My tiler is struggling to achieve this (but may be his ability?) Many thanks

logo

Our advice: We would recommend using a wet wheel cutter with a diamond blade. You must ensure that the tile is fully supported in order to achieve a crisp cut.

Clare P. 03/08/20

Can these tiles be adhered directly to the existing plastered & painted bathroom wall?

logo

Our advice: Yes they can be fixed directly to the wall however we would recommend the use of a primer such as Primer G (SKU:020101) prior to fixing

Lara r. 30/05/20

I need to attach these to a concrete breeze block wall outside. What do I need to get to attach them with?

logo

Our advice: This depends if you'd like a slow or fast setting adhesive. For a fast set, you would need to use Keraquick Grey Fast Setting Adhesive 20kg SKU: 012120UK and for a slow set Keraflex Maxi S1 Grey Slow Setting Adhesive 20kg SKU: 1202620

Read More Q & A: