> Contemporary aesthetics
> Durable porcelain construction
> Rectified edges for cleaner grout lines
> Popular large form factor
> Suitable for domestic and commercial installations
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles
*Suitable matting should be in place to absorb water splashes etcR10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
Lauren Kelly 01/09/23
Verified Buyer
Leonie 12/02/23
Verified Buyer
Kerry 07/10/22
Verified Buyer
Tony D. 09/06/21
Verified Buyer
M 01/03/22
Can these tiles be used outside
Our advice: Yes, these tiles can be used outside. With them being 10mm in thickness, the tiles would need to be laid on a concrete base with a full bed of adhesive.
Alison 23/09/20
As this tile is not available until end of next month, could I ask which tile is closest to this as an alternative? Specifically which smaller size tiles would achieve a similar look please?
Our advice: Hi. We would recommend having a look at Elven Beige Matt Floor Tiles.
Alison 27/05/20
I’m going to be tiling a large area of floor after lifting 1960’s teak parquet flooring which I believe is laid on bitumen- I want to be sure that once the floor tiles have been laid that the dark colour of any bitumen won’t bleed through. Should the floor be screened first or can I lay the tiles normally? Thanks ????
Our advice: We would never advise tiling directly onto Bitchumen as the oils it releases during heat influxes cause problems with even the best adhesives. I would recommend applying a screed first or fixing something like our HardieBacker Board SKU 445690 and then adhering the tiles with Keraquick White Fast Setting Adhesive SKU:012520 mixed with Latex Plus SKU:215106UK at a 1:1 ratio.
Rachel B. 19/02/20
I want outside tiles 120 X 120 can these go outside ?
Our advice: Yes, these tiles are suitable for outdoor use. They would need to be laid on a solid concrete bed using adhesive and grout.
Justin 11/02/20
Hi, what grout is used in the photo or what grout is would recommended for closest colour match. Thanks
Our advice: As the image on the website is manufacturer generated, we are unsure what this would be. The best match to this tile would be our Ultracolor Limestone SKU# 6029905A.
Rachel 26/08/19
Do these tiles need sealing?
Our advice: These tiles do not require any sealing no.
Sian W. 21/05/19
Are these tiles suitable with underfloor heating?
Our advice: Yes, these tiles are suitable for underfloor heating. We always recommend encasing the underfloor heating in our Ultraplan screed to protect it from potential damage during laying and removal of tiles. This also distributes heat evenly through all of the tiles to avoid getting any cold spots. Many Thanks
We are sorry that you are unhappy with the tiles that you have received. Tiles are produced in batches and can vary from batch to batch in terms of shade, calibration, etc. However, should you wish for us to investigate this further please do get in touch with our customer service team.