JavaScript seems to be disabled in your browser. You must have JavaScript enabled in your browser to utilize the functionality of this website.
You've already added this type of sample to your basket, heres some other suggestions we think you might like...
You've already added this type of sample to your basket..
01782 223822
200w Mat Kits
“Our pallets are delivered to the kerbside. Watch the video to find out more.”
In Stock
As low as: £49.99
Price as configured: £0.00
Amount required:
Add these extras for:
£
Looks like you're trying to order more tiles than we currently have in stock.
You can still place the order if you like - we'll take payment and contact you to arrange delivery once the products are ready to be dispatched.
Tiles don’t have to be cold underfoot thanks to the these incredibly efficient and easy to install underfloor heating systems from leading manufacturer Ezewarm.
Key Features
Incredibly easy to install
Even Heat Distribution
Available in two wattage variants: 160w / 200w
Twelve size variants available: 1m2 / 1.5m2 / 2 m2 / 2.5m2 / 3m2/ 4 m2 / 5m2 / 6m2 / 7m2 / 8m2 / 9m2 /10m2
Thermostat sold separately
Ezewarm underfloor heating systems are incredibly easy to install and are available in a range of standard room sizes and wattage. Fitting is easy - the systems are simply inserted between floor finishes and only require an electrician for the final thermostat connection and overall system check. Silent and invisible, once installed the system can be used with almost any flooring finish including ceramic, porcelain, and natural stone.
CUT AND FULL TILE SAMPLES
FREE*
ORDERS OVER £150*
FREE
*to most mainland UK postcodes
Q : Can the mat just be laid on top of your insulation board or does it need to be stuck down?
The underfloor heating mat can be rolled on top of the insulation boards ready to be tiled on top of. However, our recommendation would be to apply a levelling compound on top of the underfloor heating before tiling. This will help to eliminate hot spots and also add an extra layer of protection for the heating mat.
Q : Looking to put this down under kitchen floor. Floor is concrete, with a polystyrene layer, with further concrete over the top. Would you think the insulation board is necessary? Any other tips?
Insulation boards would be used on top of a concrete base to help stop the heat disappearing through the floor as opposed to through the tiles. If the poly layer that you currently have installed acts as insulation these may not be required. We would suggest seeking the advice of your builder or tiler.
Q : i need to have 2 mats. one for a 2m2 wet room and one for the adjacent extension 10m2 . do i need 2 thermostats as i want the underfloor heating on at different times or can i control both mats with separate heating patterns from one thermostat. thanks
To control two separate rooms you would require a thermostat for each area.
Q : Is this just for underfloor heating or would it work with infrared panel heaters? Thanks
The thermostats are suitable for infrared panel heaters, in advance settings on the thermostat, change the settings to read air temperature only, and this will make the thermostat compatible.
Q : What is the resistance for this mat as I have lost the info?
The resistance for the Ezemat 200W 9mq mat would be around 30 OHMS.
Items 1 to 5 of 6 total
Items 1 to 5 of 11 total
© 2018 Tile Mountain Ltd.
