> Luxury high-end aesthetic
> Hardwearing porcelain construction
> Large format means fewer tiles used fewer grout lines
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles*Suitable matting should be in place to absorb water splashes etc
R10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
Mark Cheese 06/04/23
Daniel Evans 26/03/22
We apologise that you had issues when completing the installation. As the tile is non-rectified they do not have a perfect corner however we would not expect this to affect the overall project. If you would like to discuss this further please contact us.
Steve Boxall 19/03/22
Each tile is subject to a slight curvature in line with tiling standards however we would not expect this to affect the overall installation. If you would like to discuss this further with our customer service team please contact us.
Justyna Mcdonagh 16/11/21
Louise C. 20/08/21
Will sealing the tiles darken the colour?
Our advice: This sealer will not darken the colour of the tiles.
suitable for bathrooms?
Our advice: Yes, this would be suitable. Please bear in mind with this tile having a Polished finish there will be a slip risk when wet.
Tacey Attwell 14/01/22
As the tiles are polished, are they slippery when wet?
Our advice: Any tile can be slippery when wet. We would recommend ordering a sample prior to placing a full order to check it meets your individual requirements.
whatâ€™s the thickness of these tiles please ?
Our advice: These tiles are 9.50mm thick.
Do these need to be sealed? The sample looks sealed, no absorption on a test so not sure if a separate sealer is needed as well? Please advise
Our advice: Yes, we recommend the MP 90 - 1 Ltr - Water and Oil Repellent Protection. During the polishing process, micro-pores are opened up, so these tiles require sealing to avoid staining. After initial sealing, we advise you re-seal the tiles every 2-3 years.
Azra F. 08/10/20
Do these tiles need to be sealed regularly or just the once?
Our advice: The tiles would need to be sealed more than once
If I use the polished royal grey what colour grout should I itder
Our advice: I would recommend using Keracolor SF 100 White Grout 5KG.