> Authentic replication of natural split-face slate
> Randomised structured surface
> Interlocking design
> Excellent weatherproof properties
Lynn Buckle 13/06/23
Lesley Holden 14/12/22
Sarah Leigh 29/10/22
If we can assist further with your project please contact us.
Kevin Parr 08/01/23
Hi, if these tiles are used on an internal house wall do you recommend that they should be grouted ? Thanks
Our advice: Yes, these tiles require grouting.
Andrew noble 07/08/22
What adhesive would I use for this product
Our advice: We would advise using our Keraflex Maxi S1 Grey Slow Setting Adhesive 20kg SKU: 1202620.
Hi, i am going to clad some garden walls / raised beds made from dense concrete blocks, do I need to prime them first, if so what would you recommend. And then what adhesive should I use?
Our advice: We would advise priming the wall with Eco Prim Grip Plus SKU: 1560005 or something similar and then adhering with Keraflex Maxi S1 Grey Slow Setting Adhesive 20kg SKU: 1202620.
Adam Trudgian 13/05/22
Do these needed to be grouted if so which one would you recommend?
Our advice: Yes, these tiles will require grouting. We would recommend using our Ultracolor Manhattan (Light Grey) 110 Flexible Grout 5kg SKU: 6011005A.
How easy are these tiles to cut? And do you need special edging strips or can you buy corner tiles ?
Our advice: We do not stock corner tiles or tile trim I'm sorry but you could finish the tiles with either of those if sourced elsewhere. A diamond-tipped wet wheel cutter would be required to cut the tiles.
Hi, I was thinking of fixing these to a tile backer board. Would that work and would I need a different adhesive to that mentioned here already. Thanks
Our advice: Yes, these can be installed onto our No more Ply backer boards and adhered with either our Keraquick or Keraflex adhesive.
The breeze block wall which I am covering is painted. What prep needs to be done to put the tiles on?
Our advice: We would advise removing any loose paint and priming the surface with our Prime Bond Water Based SBR Primer 1 Ltr SKU: 450405. We would then advise adhering the tiles with our Keraflex Maxi S1 Grey Slow Setting Adhesive 20kg SKU: 1202620.