> Contemporary aesthetics
> Durable porcelain construction
> Split-face mosaic effect in tile format
> Designed for use with Yosemite Grey Wall & Floor tile
Stephen McDermott 24/11/23
Kevin ROSE 13/10/23
Paving Professionals 03/03/23
Kirsty Hicks 20/04/22
We apologise you are unhappy with the finish of the tile. We always recommend a sample prior to ordering to ensure you are happy with the product. If you would like to discuss this further please contact us.
Alex J. 22/03/21
Are these suitable for fireplace.
Our advice: These tiles are suitable for use around a fireplace. If the temperature is to exceed 90degrees then a heat-resistant adhesive and grout will need to be used.
Are these tiles difficult to keep clean?
Our advice: These tiles can be cleaned the same as any other porcelain tile. We do have a porcelain floor cleaner that would also be suitable for use on these tiles (sku: LTP101).
Are these 440m in height or width?
Our advice: 440mm in height
David H. 10/01/21
Tile on tile looks good. How do they look half bond?
Our advice: To give you a clear image, there is a customer image on the Erebor White Split Face Wall tiles that shows these tiles in a half bond pattern.
Can you butt them up together and not use grout for use on a kitchen wall ?
Our advice: You will need to grout these tiles post-installation. We would recommend a grout width of between 2 and 4mm.
Can I use these on an external wall?
Our advice: Yes. these are suitable for use on an external wall
Due to the tiles being ridged, would you have issues sealing a concealed thermostatic shower?
Our advice: You should not have any issues due to the tiles being ridged, as long as the seal is completely fixed around the shower itself.