Enjoy the natural tones of slate with the Ribera range, a collection of beautiful natural effect tiles designed to replicate a split-face mosaic in a singular tile.
Key Features
Authentic replication of natural split-face slate
Interlocking design
Rustic textured appearance
Suitable for use indoor and outdoor
Matt finish
Ribera slate effect authentically reproduces the appearance of a natural split face mosaic, allowing you to enjoy a genuine natural stone aesthetic only without the maintenance and upkeep required of natural stone. Interlocking panels with a depth of approximately 45mm mean that when installed these tiles are virtually indistinguishable from real stone walls, a look that is currently very much in vogue.
Eduart Kokoshi 10/10/24
Verified Buyer
Ruksana maryam bhayat-deere 13/08/24
Verified Buyer
Kelly Daniel 01/01/24
Verified Buyer
Michael 03/07/23
Verified Buyer
Mark Downing 19/06/23
Verified Buyer
Kishan Patel 03/05/23
Verified Buyer
KATIE APPLETON 03/12/22
Verified Buyer
Laura Earle 14/11/22
Verified Buyer
Jude 19/06/22
Can these be used externally?
Our advice: Yes, provided they are installed using an exterior tile adhesive and grout.
Anonymous 26/08/21
Are these tiles suitable for wet room and shower use?
Our advice: Yes, these will be suitable for use in a shower area.
Ali 26/01/21
I'm thinking of ordering these tiles. I see answers before about grout colour are all suggesting grey, but would a sand colour not work better with these tiles?
Our advice: Our system recommends the Ultracolor Cement Grey 113 Flexible Grout 5kg for these tiles. However, if you would prefer a sand colour, we recommend the Ultracolor Sand 133 Flexible Grout 5kg.
Sids 19/11/19
What thickness adhesive would be ideal?
Our advice: We would recommend 5mm for these tiles.
Sids 19/11/19
What thickness adhesive would be ideal?
Our advice: We would recommend 5mm for these tiles.
Sids 19/11/19
2qs. 1. Do I need to use spacers and grout if it’s not in a wet area? 2. Is it possible to use 1mm spacers between tiles if required?
Our advice: We would always recommend using spacers to ensure that the tiles are correctly installed. The Ribera Tiles, as with all tiles must be grouted we would recommend a minimum of 2mm for this tile range on the wall.
Ash 12/11/19
Can these tiles be applied to a concrete block retaining wall and how to apply them?
Our advice: Yes these tiles can be applied to a concrete block retaining wall using Keraquick Grey Fast Setting Adhesive.