> Faithful reproduction of weathered concrete
> On-trend industrial aesthetics
> Hardwearing porcelain construction
> Matt finish
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles*Suitable matting should be in place to absorb water splashes etc
R10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
Can these tiles be used in a bathroom, floor and walls?
Our advice: These tiles are suitable for a bathroom project. They are intended for use on the floor but should you want to adhere them to a wall; a supportive backer board would need to be installed first.
Are these tiles squared off, so they can be butted up against each other without grout in-between? Thanks
Our advice: All Ceramic and Porcelain tiles require grouting. For this particular tile, you would need a minimum of a 3mm grout joint.
For SKU: 448530- DO you do larger sizes, eg 1200mm x 600mm or could you recommend similar type matt finish panels? I am looking for beige colour matt finish panels. Thanks
Our advice: This tile is not available in any other size I'm sorry. The closest alternative in a larger size would be our Arkety Sand Floor Tile SKU: 444430.
Are these suitable for a wet room?
Our advice: The tiles can be used in a wetroom area, but do not have a highly textured surface. We would recommend something more grippy for a wetroom floor, such as our Doblo Rock tiles.