> Authentic, Mediterranean-style design
> Realistic encaustic patterns and faux distress lines replicate genuine Iberian tile style
> Hardwearing porcelain construction
> Randomised pattern combinations make for aesthetic variety
> Suitable for walls and floors
Kat 13/10/22
Are the tiles suitable for a wetroom
Our advice: They are suitable for the installation. We would just advise considering a tile with a higher anti-slip rating. Normally an R11 or above.
Chris 18/05/22
Hello, I'm interested in the Delft tiles. I noticed the Grey have a wear rating of 3, whereas the Blue version have a wear rating of 4. I just wanted to check this is correct - so the Blue are more hard wearing than the grey? Many thanks Chris.
Our advice: Yes, as strange as this sounds it is correct that these two tiles have different wear ratings.
Sarah 08/03/22
Hi can I order a sample
Our advice: Yes, you can order either a cut or a full sample on our website. Please click on the sample button shown on the website. Alternatively, you can call us on 01782 223822
Laura 29/03/21
can these tiles be used as a decorative feature on an outdoor patio?
Our advice: Yes, they are suitable. We recommend getting a sample to ensure that they are suitable for you.
Clare P. 13/12/20
Is there a best tile cutter/wheel to use for these porcelain tiles, in order to cut a crisp edge. My tiler is struggling to achieve this (but may be his ability?) Many thanks
Our advice: We would recommend using a wet wheel cutter with a diamond blade. You must ensure that the tile is fully supported in order to achieve a crisp cut.
Clare P. 03/08/20
Can these tiles be adhered directly to the existing plastered & painted bathroom wall?
Our advice: Yes they can be fixed directly to the wall however we would recommend the use of a primer such as Primer G (SKU:020101) prior to fixing
Lara r. 30/05/20
I need to attach these to a concrete breeze block wall outside. What do I need to get to attach them with?
Our advice: This depends if you'd like a slow or fast setting adhesive. For a fast set, you would need to use Keraquick Grey Fast Setting Adhesive 20kg SKU: 012120UK and for a slow set Keraflex Maxi S1 Grey Slow Setting Adhesive 20kg SKU: 1202620