> Authentic replication of Gneiss stone
> Durable porcelain
> Available in multiple colour variants
> Multiple sizes available
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles*Suitable matting should be in place to absorb water splashes etc
R10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
Can these be installed on mortar with slurry, instead of using adhesive?
Our advice: We wouldn't advise doing so as this method relies on some absorption on the tiles part, which you will not achieve with a Porcelain tile. We would advise either using our specifically designed mortar and primer from our Norcros Rock Tite System or laying the tiles onto a cured concrete base with an external tile adhesive.
Hi, do these need to be sealed? If so, what sealer would you recommend? Thanks
Our advice: These tiles do not require sealing, but if you wanted to you could protect them with our LTP Porcelain Tile Protector - Pre Grout Treatment Interior & Exterior Use SKU: LTP391.
What Ive is each individual tile
Our advice: The size is 595x595mm.
Are these a white/grey as hard to tell from picture.
Our advice: Yes, they are. Please order a free cut sample to gain the best understanding of the colour.
Hello. I am interested in these tiles for our patio space, but would like to have the same tiles for the steps up to a slightly raised garden. Are there specific tiles available for steps or can they be cut accordingly?
Our advice: These tiles can be cut and used for any steps required within your project.
Can I fit these on building sand
Our advice: No. These can be installed onto a cured concrete base with an exterior Porcelain tile adhesive or onto a hardcore base using our Norcros Rock Tite System.
Hi what is the minimum grout space
Our advice: We would recommend a minimum grout joint of 5mm for external projects.