> Aesthetics inspired by nature
> Durable porcelain construction
> Excellent weatherproof properties
> No need for post-installation sealing
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles*Suitable matting should be in place to absorb water splashes etc
R10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
Namasivayam Sapaetharan 25/04/23
Usman Khalid 24/04/23
Greg Hainsworth 07/04/23
Stephanie Adams 02/01/23
Can we lay these slabs and point with a traditional sand and cement mix?
Our advice: These tiles would need to be installed onto a cured concrete base and adhered using an exterior tile adhesive like our Adesilex P4 Grey Floor Adhesive 20kg SKU: 218220 and grouted with Ultracolor Manhattan (Light Grey) 110 Flexible Grout 5kg SKU: 6011005A. Alternatively, they could be installed onto a hardcore base and adhered with our Norcros Rock Tite system.
S ahmed 25/05/22
Where are these tiles manufactured?
Our advice: These tiles are manufactured in Spain.
Do the Icarus beige porcelain slabs come in 600mm x 900mm? Thanks
Our advice: No, just 600x600mm.
Are these frost proof
Our advice: Yes, these tiles are frostproof.
Do your prices include vat
Our advice: Yes, VAT is included in our prices.
I see a curved edge in one of the photos. Can these be cut with a small angle grinder by hand or do they need something more specialised? And is it better to lay then cut in situ or cut individually and then lay? Thanks.
Our advice: We would advise using an angle grinder with a diamond-tipped blade. It would be best to cut the tiles before installing them. They will need to be fully supported throughout the cutting.
can be use in kitchen?
Our advice: This tile can be used indoors and in a kitchen; however, due to the thickness of it, it may affect the height of your floor, so we would recommend discussing this further with your installer.