1 / 1
Adesilex P4 Grey Floor Adhesive 20kg
Key Features
> Fast-setting, cement-based
> Available in 20kg pack
> Suitable for external and internal use
> Designed for use with medium to large format floor tiles
> Can be used as internal and external levelling compound
Description
- SKU 218220
- Colour Grey
- Weight 20.00 KG
- Suitable for Underfloor Heating Yes
- Coverage (SQM) 5
Product Reviews
Ryan 16/06/24
Verified Buyer
Andy Joy 02/04/24
Verified Buyer
Mrs Santushi Durbal 09/03/24
Verified Buyer
Felicity Borrelli 27/07/23
Verified Buyer
natalie 04/06/23
Verified Buyer
Stephen 11/05/23
Verified Buyer
Thomas 08/05/23
Verified Buyer
Roman Musteata 25/10/22
Verified Buyer
Q & A
Ask A Question
Brian 27/06/22
Do you have to have a cured concrete mortar base to use this? I have seen videos where the porcelain tile is laid onto wet mortar. An adhesive is still applied to the back of the tile. It will be a pain to wait 28 days for the mortar to cure. Is there perhaps an alternative product. Thanks
Our advice: This adhesive should be used when installing tiles onto a cured concrete base. If you don't have the timeframe to allow the curing time for concrete you could install the tiles onto a hardcore base and adhere the tiles with our Norcros Rock Tite system.
Karl 21/06/22
Hi how many bags would I need for 12msq
Our advice: You would need x3 bags.
Neil 07/06/22
Hi - just completing a patio with 20mm granite slabs 600 * 600 laid using backing slurry and sharp sand / cement mix base onto an MOT 1 compressed foundation, and planning to lay the same slabs onto two steps of cured concrete. What adhesive do you recommend please? The two steps form a partly covered entrance so they will not be fully exposed to the elements but will get some rainfall. Many Thanks
Our advice: This adhesive would be suitable for installing the slabs onto a stepped project.
Dan 27/04/22
Hi Iam laying large format 1mx1m 20mm thick porcelain pavers. 1) Do I need to prime the backs of the porcelain pavers first with another product or can I use this directly to bond. 2) what depth would you recommend for this size pavers - would this be 10mm or closer to 20mm?
Our advice: We would need to know which method of installation you are using. Could you please either call us on 01782 223822 or email us at customer.service@tilemountain.co.uk.
Gem 25/03/22
Hi, just wondering how many bags to order for 16sq meters
Our advice: You would require x4 bags.
Mick 07/03/22
What tile adhesive for underfloor heating
Our advice: We would advise using our Keraquick Grey Fast Setting Adhesive 20kg SKU: 012120UK.
Mike 23/05/21
What adhesive shall I use for 20 mm thick porcelain exterior tiles
Our advice: Assuming you are tiling onto a cured concrete base I would advise using our Adesilex P4 Grey Floor Adhesive 20kg SKU: 218220