UP TO 15% OFF WOOD FLOORING
Tile Mountain
Go to the top of page

Barnaby White Marble Effect Matt Porcelain Wall and Floor Tile

Size 300x600x8mm
SKU: 456680
1538 sqm In Stock
£20.99 m2
calculations
How many do I need?
Top tip: Add extra for your cut pieces 11% Wastage Added
Add 11%
£3.78 inc VAT

Key Features

> Realistic Calacatta Gold marble effect

> Durable porcelain construction

> Matt and Gloss variants available

> Low maintenance

> No post installation sealing required

Description

Product Details
  • SKU 456680
  • Material Porcelain
  • Colour White
  • Thickness 8 mm
  • Anti-Slip Rating R9

    DIN 51130 shod Ramp Test

    R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.

    Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles

    *Suitable matting should be in place to absorb water splashes etc

    R10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.

    The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.

    R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.

    The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.

    R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits

    The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.

    R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits

    The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present

  • Finish Matt
  • Floor or Wall Both
  • Tiles Per Square Metre 5.56
  • Wear Rating 3
  • Rectified No
  • Suitable for Underfloor Heating Yes
  • Box Quantity 8
  • Weight 3.33 KG
  • Height 300
  • Width 600
  • Pattern Repeats 23

Product Reviews

Anonymous 17/05/24

Nice tiles but not as beautiful as shown on the website. Can't see the marble effect but it's ok, not bad.

Verified Buyer

Mollie Finch 15/05/24

Verified Buyer

Tracy Owens 23/04/24

Amazing

Great service from the staff measurements given and tiles here within 4 days. Beautiful quality. Tile mountain also gave advice on which adhesive and grout to use. Will certainly shop with tile mountain again.

Verified Buyer

Vishanti Dandapat 16/04/24

Tiles look great in our bathroom

We have them on bathroom and utility floor very pleased

Verified Buyer

Rhys Hamilton 14/04/24

Good quality

Verified Buyer

Elaine Booth 11/04/24

Fantastic quality

These tiles are absolutely gorgeous they have Transformed our bathroom.

Verified Buyer

Anonymous 29/03/24

Carnaby White Marble Effect Matt Porcelain Wall and Floor Tile

Good quality and attractive design

Verified Buyer

Sam 27/02/24

Beautiful

On the website the photo is shocking! Who would tile in that way? I saw their potential. They cut really easily and were a dream to work with. Excellent value for money. They look very expensive once fitted.

Verified Buyer

Read More Reviews:

Sharon Ross 10/08/22

Hi - are these suitable for a wet room floor and wall? Do you offer opportunity to get samples? Thank you

logo

Our advice: The tile can be installed for a wetroom project but ideally, we would advise using a tile with a higher anti-slip rating as this tile would be really quite slippery when wet.

Oz 03/08/22

Are these suitable for kitchen floor?

logo

Our advice: Yes, these tiles would be suitable for a kitchen installation.

SIHAM 04/06/22

Hi Do these tiles come in bigger size?

logo

Our advice: These tiles are only available in the one size. We offer many other marble effect tiles in our Carrara range which may be better suited to your project.

Lena 30/05/22

HI, on the spec it gives a rating of "R9" for this tile. When reading this it does not state that this tile is suitable for wet rooms or for shower, high water exposure as it does for "R11". Could you please shed some light on this and also if they will stand up to harsh cleaning/bleaching agents for removing limescale please. I would to use this tile in shower and also live in hard lime scale water area.

logo

Our advice: In terms of slip resistance, this tile would be advisable for a shower unit or wetroom. If the tiles are solely being installed on the walls they are more than suitable. We would need to know what type of cleaners you intend to use before we could advise on the suitability.

Lesley 29/05/22

Do you do this in gloss please

logo

Our advice: Yes, this tile is available in a Gloss finish. Barnaby White Gloss Porcelain Wall and Floor Tile SKU: 456685

T 02/05/22

is this a grey and gold colour?

logo

Our advice: The tile is white with predominately gold/brown veining. There will be areas of this veining that is grey also.

Pete 14/03/22

Are these suitable for showers?

logo

Our advice: Yes, this would be suitable.

Read More Q & A: