> Authentic replication of concrete
> Contemporary aesthetics
> Hardwearing porcelain construction
> Available in multiple colour variants
> Multiple size variants available
Paul 10/11/22
What drill bit class would be needed for these tiles?
Our advice: You would require a diamond-tipped drill bit.
Carol 13/05/23
Are these suitable for use with under floor heating please? Also are they non slip?
Our advice: Yes, these tiles are suitable for use with Underfloor Heating. The tiles have an anti-slip rating of R10, we would recommend ordering a sample to test the tile's suitability for your project.
Peter A 18/02/24
I am looking to tile my existing worktops Would these be practice
Our advice: We would not advise installing these tiles on a worktop.
Glen 16/03/24
Are these suitable for outdoor use?
Our advice: Yes, these tiles may be installed outside. Please note the tiles would need to be installed onto a concrete base and adhered using a full bed of exterior tile adhesive.
Rebecca 01/04/24
Do these have a good grip?
Our advice: This tile has an R10 anti slip rating which would be deemed best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances. The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
Sav 06/04/24
Are these tiles butt joined or do you need to leave a thin grout gap
Our advice: These tiles require a minimum grout joint of 3mm.
Joanne 14/04/24
How much is installation on a bathroom being 90 by 90 inches please ?
Our advice: We do not offer installation, unfortunately.