Tile Mountain

Key Features

  • > Improves bond of adhesive for ceramics, cement, gypsum, and lime-based plasters

    > Solvent-free

    > Low emission of volatile organic compounds (VOC)

    > Smooth levelling compounds can be applied on top

    > Coverage approximately 3m2 per KG

Description

Eco Prim Grip Plus

47 reviews 47 reviews
33 pieces in Stock
QTY
image
1560005
5.00 KG

Product Details

Product Guide

Key Features

  • > Improves bond of adhesive for ceramics, cement, gypsum, and lime-based plasters

    > Solvent-free

    > Low emission of volatile organic compounds (VOC)

    > Smooth levelling compounds can be applied on top

    > Coverage approximately 3m2 per KG

Description

Customers also liked

Read More Reviews:

Q & A

mark12/04/24
I have a concrete floor that has old black mastic adhesive (rock hard and very firmly attached to the concrete)spread over say 80-90% of the floor. Would this primer work on top of that, or can you suggest something else? Our Advice

We would not suggest priming ontop of the mastic. The mastic would either need to be removed entirely or boarded over.

Neil30/06/23
Hi, I have some plant beds built out of concrete block. Is this product suitable to prime the block and then use 012120UK for the adhesive and then 6011005A for the grout? I'm looking at using the Palermo natural slate tile.Our Advice

Yes, this would be a suitable primer for priming concrete blocks outdoors.

s mcmahon14/07/22
How much would i need for 97m2Our Advice

You would require x7 tubs.

Cherie24/11/17
I want to tile on tile in my bathroom from top to bottom of the wall and want to know if this is the only thing I need to do this? Many thanksOur Advice

It is always best practice to remove any existing tiles as it will be difficult to know if they will bear the weight of the new tiles depending on how secure they are. However to tile on top of existing tiles, we would recommend using Eco Prim Grip, then a suitable adhesive based on the tile chosen.

Sian19/03/17
Should you use this primer when tiling over existing wall tiles with Mapei D2 ready mixed adhesive, or will the adhesive be ok an its own. ThanksOur Advice

The Mapegrip D2 Ready Mix Adhesive 15kg - SKU: 011715 is suitable to use without any primer to tile onto existing tiles.

Fiona06/03/17
Is this a suitable primer for use between decoupling membrane and chipboard floor? We cannot add a layer of ply as floor build-up would then exceed underfloor heating limits. Thank youOur Advice

Eco Prim Grip is what we would recommend to prime the chipboard, so yes, this would be suitable for you.

steve20/09/16
can any floor tile adhesive be used on the eco prim grip when tileing..thanksOur Advice

Yes any adhesive should be suitable, it would depend on the exact installation as to which adhesive would be best suited.

Read More Q & A:

Our customers love us!

4.7 Out of 5 Rated Excellent!