Tile Mountain

Key Features

  • > Ready to use, just add water for a quick and easy installation

    > Ideal for installation of Tile Mountain’s 20mm Porcelain Outdoor Slabs

    > We recommend priming slabs with MapePave Slurry for stronger adhesion

    > Suitable for installation onto minimum 100mm compacted MOT Type 1 with a minimum mortar bed of 25mm

    > Suitable for installation onto solid concrete subbase with a minimum Mortar bed of 10mm

    > Consumption - 25mm Bed - 25kg bag covers approximately 0.4 m²

    > 10mm Bed - 25kg bag covers approximately 1.0 m²

    > Drying time - Light foot traffic after 12 hours

    > Joints can be grouted after 24 hours

    > Surfaces may be put into service after approximately 4 days.

    > 60 minute work time

    >Classic grey mortar colouring

    >Compliant with the rigorous requirements of BS 7533

Description

MapePave Mortar - 25Kg

12 reviews 12 reviews
In Stock
QTY
image
Grey
466990
25.00 KG

Product Details

Product Guide

Key Features

  • > Ready to use, just add water for a quick and easy installation

    > Ideal for installation of Tile Mountain’s 20mm Porcelain Outdoor Slabs

    > We recommend priming slabs with MapePave Slurry for stronger adhesion

    > Suitable for installation onto minimum 100mm compacted MOT Type 1 with a minimum mortar bed of 25mm

    > Suitable for installation onto solid concrete subbase with a minimum Mortar bed of 10mm

    > Consumption - 25mm Bed - 25kg bag covers approximately 0.4 m²

    > 10mm Bed - 25kg bag covers approximately 1.0 m²

    > Drying time - Light foot traffic after 12 hours

    > Joints can be grouted after 24 hours

    > Surfaces may be put into service after approximately 4 days.

    > 60 minute work time

    >Classic grey mortar colouring

    >Compliant with the rigorous requirements of BS 7533

Description

Customers also liked

Read More Reviews:

Q & A

sam09/06/23
can I use this instead of the Norcross Mortar? If mixed in with sharp sand to fix my patio porcelain tiles Our Advice

Yes, this product is designed to be used with sharp sand instead of regular cement when installing porcelain slab tiles.

Tony13/05/23
Hi can you just confirm is the 6:1 ratio 6 = Rock-tite mortar additive 1 = sharp sand? thanksOur Advice

The Mix ratio for this product is 6 parts Sharp Sand to 1 part Mortar Additive (75KG of Sharp Sand to every 12.5KG Rock-Tite Additive).

Jeanette02/06/22
Is this classed as slurry? And how many would we need for 24metresOur Advice

No, this is specifically designed for use with Porcelain slabs. 1 x 12.5kg bag of Mortar Additive (6:1 mix) will cover approximately 2m2 at 25mm thickness so you would require x12 bags.

Callum23/04/22
The ratio 6:1 is that one bag to 6 shovel off sand.. and how many slabs could you lay with this ratio (per bag) Our Advice

The ratio would be 75kg sharp sand per 12.5kg bag. The coverage provided depends on how thick you plan to set the mortar.

Robert18/04/22
How many bags to cover 16 square metres at 25 mm thick Our Advice

You would require x27 bags.

Rebecca14/05/21
Hi, we are looking at Bellevue Grey Outdoor Slab. how many bags needed for 30sqm, 3mm grout please?Our Advice

If you are laying the adhesive at the recommended minimum thickness of 25mm you would need 50 bags. In regards to the grout, Norcros recommend a minimum grout joint of 8 mm with this in place you would need three tubs of the brush in grout.

Joshua17/10/20
Hi, im trying to figure out how much mortar id need for the porcelain tiles. Ive seen below that people have answered and said it covers 0.3m2 - 0.6m2 depending on the gap. However it doesn't specify whether that is per bag or per kg.Our Advice

This would be per bag

Read More Q & A:

Our customers love us!

4.7 Out of 5 Rated Excellent!