> Contemporary aesthetics
> Hardwearing ceramic construction
> Popular plank form-factor
> No post-installation sealing required
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles*Suitable matting should be in place to absorb water splashes etc
R10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
Can these tiles be laid in herringbone design?
Our advice: These tiles are unsuitable for a herringbone design as they are too short and too wide.
What dimensions are your Articwood Camel Wood Effect Floor Tile?
Our advice: These floor tiles are 615x205x9.5mm.
Anthony evans 01/10/22
What is the size per tile
Our advice: These tiles are 615x205x9.5mm.
Are they suitable to use in the bathroom?.
Our advice: Yes.
can you use glitter grout with these tiles and what adhesive do you recommend.
Our advice: If you are referring to our Kerapoxy grout with the additive glitter then yes this would be suitable. In terms of adhesive, we would advise using our Keraquick Grey Fast Setting Adhesive 20kg SKU: 012120UK.
What size spacers are used to get the same effect as shown in the picture please?
Our advice: The images shown online is computer generated and therefore does not show an actual grout joint. We would recommend using no smaller than a 3mm spacer.
What colour grouting do you suggest for the camel tile
Our advice: We would recommend the ultracolor white 100 flexible grout (SKU: 6010005A).