> Authentic replication of Gneiss stone
> Durable porcelain construction
> Weatherproof
> Available in multiple colour variants
> Multiple sizes available
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles
*Suitable matting should be in place to absorb water splashes etcR10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
Dominic 14/07/22
Is this slab OK to lay on a traditional sand and cement bed with full mortar bed under each slab?
Our advice: We would advise against this method. The two methods we would advise would be installing onto a cured concrete base and adhering with an exterior tile adhesive or laying onto a hardcore base and adhering using our Norcros Rock Tite Three part system. Please contact us on 01782 223822 if you wish to discuss this further.
Tony 26/06/22
What colour grout would you recommend for the Bellevue graphite slabs
Our advice: We would advise using either our Ultracolor Anthracite (Charcoal) 114 Flexible Grout 5kg SKU: 6011405A or our Norcros Rock-Tite Brush in Grout 15kg - Tropical Ebony SKU: 451495.
peter lees 25/05/22
can they be laid on existing slabs using sand and cement mix
Our advice: No, we would completely advise against this. The two methods we would suggest would be installing the slabs onto a cured concrete base and adhering with an exterior tile adhesive or laying the slabs onto a hardcore base and adhering using our Norcros Rock Tite System.
Adam 28/02/22
Would these tiles be ok lay on a pedestal system?
Our advice: Yes, these tiles would be suitable to install with our pedestal system.
Kevin F. 01/06/21
Can you lay them on a patio with sand and cement
Our advice: We would only advise either installing these onto a cured concrete base and adhering with an outdoor tile adhesive such as our Adesilex P4 Grey Floor Adhesive 20kg SKU: 218220 or using our Norcros Rock Tite Three-part system to install onto a heavily compacted type one aggregate.
ian 31/01/23
Are these a non slip
Our advice: These tiles have an anti-slip rating of R11 which would be deemed best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
Peju 28/05/23
What's the best way to clean the slabs. Any special products or will warm water floor cleaning liquid be ok?
Our advice: For everyday cleaning and aftercare, we recommend using the LTP Porcelain Tile Cleaner (SKU: LTP101).