> Brilliant white, neutral tone
> Durable porcelain construction
> Suitable for both walls and floors
> No sealing required
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles*Suitable matting should be in place to absorb water splashes etc
R10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
Can these be used outdoors?
Our advice: These tiles can be used outdoors with them being porcelain tiles. With them being 8mm thick they would need to be installed onto a fully cured concrete base
If I wanted to install wet underfloor heating beneath these tiles and I had timber flooring, would the hard backer board be fitted first and then the heating and lastly the tiles? As I thought the tiles normally stick directly onto the hard backer board?
Our advice: We couldn't advise fully on this installation and so would suggest seeking advice on the installation from a qualified professional.
Can I please check these are suitable for both floors and walls as stated in the description ?
Our advice: Yes, these tiles are suitable for both wall and floor projects.
G GEORGIOU 01/10/22
recommended grout colour for this tile??
Our advice: We would recommend using Ultracolor White 100 Flexible Grout 5kg SKU: 6010005A or Ultracolor Manhattan (Light Grey) 110 Flexible Grout 5kg SKU: 6011005A.
Is this a full bodied porcelain ?
Our advice: This tile is not a full-bodied Porcelain tile.
Are these tiles suitable for timber wood flooring ? Worried they may crack with timber floor due to floor movements. Please advice the recommended installation methods for both concrete and timber floorings. Thanks
Our advice: For concrete floors, we recommend using Primer G (sku: 020101) to prime the concrete, and then using a suitable adhesive and grout to install the tiles. We would not recommend tiling directly onto a timber wood floor. We would advise laying HardieBacker boards (sku: 445675) over the floorboards first, and then using a suitable flexible adhesive and grout to install the tiles.
What is wear rating 4?
Our advice: Tiles with a PEI rating of 4 are suited for installations that are subjected to regular levels of foot traffic. Recommended for medium commercial and light institutional use, such as restaurants, hotels, hospital lobbies and corridors.