> Carrara marble effect
> Realistic marbling and veining
> Durable porcelain construction
> No sealing required
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles
*Suitable matting should be in place to absorb water splashes etcR10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
Gareth 11/01/23
What are the dimensions of a single tile? I can't seem to see it!?
Our advice: The tiles measure 600x300x8mm.
Helen 05/01/23
Hello - how do you install these without the grout as per the picture? do you join them together without grout? how does water not get in between the join? Thanks,
Our advice: These tiles require a minimum grout joint of 3mm. We are sorry for any confusion caused as the image you are referring to is a computer-generated image and so does not account for any grout joints.
Andy 15/10/22
I’m after 500x250 Matt in these tiles are they available
Our advice: I am sorry we dont offer marble tiles in this size.
Lainey 26/04/22
Are these tiles suitable for a small bathroom floor (not wetroom)?
Our advice: These tiles are an R9 anti slip rating, these would be suitable for a bathroom floor but we do advise that the floor could become slippy underfoot when they are wet.
Baj 01/04/22
Can you get these tiles in a larger size? Thanks
Our advice: Yes, these tiles are also available in 605x605mm, 1200x600mm, 800x800mm, 1200x1200mm. Please type Carrara White Matt into our search bar at the top of the website to bring up all the tiles available in this range.
Keith 23/03/22
What type of tile cutting blade would you recommend for these tiles
Our advice: We would recommend using a diamond-tipped wet wheel cutter.
Nat 18/02/22
where is this product made in?
Our advice: This tile is manufactured in Spain.
We are very sorry to see that you have experienced some problems with your deliveries and during installation. We do expect our courier to take care with our orders; however, due to the nature of the goods, in some small instances, damage can occur. We are sorry, however, for the inconvenience that this has caused. For non-rectified tiles, we would always advise installing them with a grout joint of at least 3mm to account for any small differences in calibration. If you wish to discuss this any further, please do not hesitate to get in touch.