1 / 2
Kerapoxy White 100 Grout 5kg
Description
When is a grout not a grout? When it’s Mapei Kerapoxy, a polymer-based resin epoxy grout that dries like plastic!
Key Features
-
Two-component expoxy grout
-
Acid resistant
-
Suitable for interior and exterior use
-
Can be used as adhesive
Mapei Kerapoxy is a premium-grade, water-cleanable, 100%-solids, high-strength epoxy mortar and chemical-resistant non-sagging grout. Available in 23 colours for grouting, Kerapoxy is excellent for countertops, high-traffic areas, and areas needing stain and chemical resistance. Use for joints between 2-7mm with ceramic tiles and natural stone and enhance even further if you so wish by adding Mapei MapeGlitter to make your grout lines sparkle like the night sky.
- SKU 4510005
- Colour White
- Suitable for Underfloor Heating Yes
- Weight 5.00 KG
Product Reviews
Q & A
Ask A Question
Al 10/03/22
Does this dry white or off white? Will it match the Naos Blanco Brillo Floor Tiles well? I am laying 18m2 of the Naos Blanco Brillo Floor Tiles how much would I need with a 2mm grout line? Will it discolour is using on top of grey tile adhesive? Thanks
Our advice: This will dry in an off white. It would be one of the best matches for Naos we could offer but would not be an exact colour match. We would also advise using a minimum grout joint of 3mm on the Naos Brillo as it's not a rectified edge. Whether you go with 2mm or 3mm only one 5kg tub would be required.
peter 28/01/19
Would you ship to Spain 07157 please? I am looking for 8 x 5Kg Kerapoxy White 100 - Many thanks.
Our advice: We do only ship within the UK. However, we do offer a collection service. We will wrap the pallets and a courier of your choice would be able to collect them ready for shipping outside of the UK.
chris 31/03/18
is this suitable for grouting a tiled kitchen worktop.
Our advice: The Kerapoxy White 100 Grout 5kg (SKU 4510005) is suitable to use for grouting tiled kitchen worktops as it has been hygiene tested.
Paula 23/01/18
How many tubs would we need to cover 17sq m? The tiles are 600 x 600 with 2mm spacers?!
Our advice: You will require one tub based on the information provided. If using an epoxy grout such as our Kerapoxy grout range, we would recommend purchasing our Kerapoxy Cleaner to clean as you go along with installation.
C 21/05/17
Is this ok to use for glass mosaic sheets 300 x 300 in a bathroom? can it be used as an adhesive too? And, do you need to seal grout lines afterwards? Thanks.
Our advice: Our Kerapoxy White 100 Grout 5kg would be compatible for use on glass mosaics providing that the grout gaps are no smaller than 3mm, the reason for this is keropoxy on grout joints 3mm or above. As our Kerapoxy White 100 Grout is a resin product, it does not require sealing. It can also be used as an adhesive.
Amie 01/03/17
How many tubs would I need for 6 square metres using craquele tiles? Thanks
Our advice: Hi, one tub of Kerapoxy White 100 Grout 5kg will cover 6 square meters if in the event that there is any wastage then two will be required.
Aryeh 27/02/17
How many tubs would i need for 37 square metres of tiling? 600 x 600mm tiles (9mm depth). 3mm grout lines.
Our advice: You would require 3 tubs of the Kerapoxy.
We are sorry to hear that you are not happy with this product. As long as the correct ratio of grout to hardener is used, the Kerapoxy grout should start to go off in roughly 45 minutes. If you are finding that it is taking longer than this, unfortunately, the ratio of hardener to grout has likely been mixed incorrectly. You should use the full tub of hardener with the full tub of grout and mix in one go to maintain the ratio and mixing in batches could cause an incorrect ratio.