Keraquick Grey Fast Setting Adhesive 20kg

Key Features

> Water resistant and frost-proof once fully cured

> Suitable for internal and external use

> Can be used for adhesive bed up to 10mm thick

> Suitable for use with underfloor heating

> Fully offset residual CO2 emissions, supporting sustainable construction and renovation

Description

Keraquick Grey Fast Setting Adhesive 20kg

182 reviews 182 reviews

Size: 20 KgSKU: 012120UKIn Stock

£24.99

QTY

SKU012120UK

Weight20.00 KG

ColourGrey

Coverage(SQM)5

Suitable for Underfloor Heating Yes

Product Details

Product Guide

Key Features

> Water resistant and frost-proof once fully cured

> Suitable for internal and external use

> Can be used for adhesive bed up to 10mm thick

> Suitable for use with underfloor heating

> Fully offset residual CO2 emissions, supporting sustainable construction and renovation

Description

Shop the collection

Item 1 of 10

Read More Reviews:

Q & A

Craig 17/11/22

Can this be applied to an external screed that has not thoroughly dried due to rain Our Advice

No, the screed would need to be fully cured prior to applying this adhesive.

Mr roberts12/06/22

How many bags will I need for 25sqmOur Advice

You would roughly require x5 bags. If you require a particularly thick layer more bags would be required.

Saf06/03/22

I have a recently screeded floor about 2 months ago with wet underfloor heating. Using 880x240 tiles SKU: 441240, would Mapeker Rapid Set FlexTile Adhesive be suitable? Thank youOur Advice

You could use the Mapeker Rapid set but Keraquick Grey Fast Setting Adhesive 20kg would be a better choice.

Darren04/03/22

Csn this be used to put ceramic tiles on a epoxy resin floorOur Advice

No, this would not be advisable. The Epoxy resin would need to be removed.

dave06/12/17

Is it okay for sticking tiles onto tilesOur Advice

The Keraquick Grey Fast Setting Adhesive 20kg (SKU 012120UK) would only be suitable to use when tiling onto tiles if used with Eco Prim Grip 5kg (SKU 1560005), we would also recommend scoring the old tiles for a better grab factor.

Sean13/03/17

Would the adhesive be ok to use on a painted concrete base or would the paint need sanding off?Our Advice

We would always recommend to remove the paint where possible to ensure that the adhesive can bond with the wall. Where this is not possible, it would be best to sand the wall to remove as much paint as possible.

mary28/11/16

Is this the right adhesive to be used on plywood for stoneware floor tiles? Thank you in advanceOur Advice

The Keraquick Grey is suitable for use on a plywood substrate with a multitude of tile types. In order to answer more accurately, it would be helpful to know the exact tile you are referring to.