Tile Mountain
Go to the top of page

LTP Colour Intensifier (1 Litre)

SKU: LTP131
£16.99 each
£16.99 inc VAT

Easily protect wall and floor tiles and give them an enhanced matt finish with LTP Colour Intensifier; a specially formulated solution suitable for use with all types of natural and artificial stone, unglazed porcelain, and concrete.

Key Features

  • Suitable or use on wall and floor surfaces
  • Provides enhanced matt finish
  • Protects against water, oil, grease and dirt
  • Suitable for use on natural and artificial stone, unglazed porcelain, sandstone, slate, marble, terracotta, quarry, brick and concrete
  • Coverage: Lower porosity surface: approximately 1-2 litres per 10m2 / Higher porosity surface: approximately 3-4 litres

LTP Colour Intensifier is specially formulated to seal natural stone surfaces, whilst simulatneously enhancing colors. Suitable for use on slate, marble, travertine, terracotta, limestone, oriental terrazzo, LTP Colour Intensifier offers protection against water, grease stains and dirt, all whilst allowing stone surfaces to breathe. This product will dry after around two hours, but will take a further three days to become fully resistant.

Product Details
Product Guides

Product Reviews

No Reviews Found

David Metcalfe 12/09/18

How do you apply the the LTP to slate tiles. Thank you in advance

logo

Our advice: Hi David Before sealing, we recommend cleaning the slate with the LTP Grimex to ensure there are no manufacturing contaminants that could affect the seal. The Colour Intensifier can be applied before grouting with a brush, cloth or a sponge. It needs to be applied evenly and buffed after 15-30 minutes before buffing off the excess. After grouting, a further coat can be applied in the same way, and as well as affirming the seal in the tile, will also seal the grout to aid cleaning and prevent discolouration. To keep the sealing good condition, we recommend the LTP Waxwash as a general cleaner. https://www.wallsandfloors.co.uk/ltp-cleaning-protecting-ltp-grimex-intensive-tile-cleaner https://www.wallsandfloors.co.uk/ltp-cleaning-protecting-ltp-waxwash-tile-maintenance Regards Walls And Floors

David Metcalfe 12/09/18

How do you apply the the LTP to slate tiles. Thank you in advance

logo

Our advice: Hi David Before sealing, we recommend cleaning the slate with the LTP Grimex to ensure there are no manufacturing contaminants that could affect the seal. The Colour Intensifier can be applied before grouting with a brush, cloth or a sponge. It needs to be applied evenly and buffed after 15-30 minutes before buffing off the excess. After grouting, a further coat can be applied in the same way, and as well as affirming the seal in the tile, will also seal the grout to aid cleaning and prevent discolouration. To keep the sealing good condition, we recommend the LTP Waxwash as a general cleaner. https://www.wallsandfloors.co.uk/ltp-cleaning-protecting-ltp-grimex-intensive-tile-cleaner https://www.wallsandfloors.co.uk/ltp-cleaning-protecting-ltp-waxwash-tile-maintenance Regards Walls And Floors