> Eye-catching vintage aesthetics
> Durable ceramic construction
> Available in five colour variants: Laurel / Sienna / Indigo / Star / Silver
> Geometric wall & floor variant available
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles*Suitable matting should be in place to absorb water splashes etc
R10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
Amanda Balmain 08/08/23
christina oneill 29/07/23
Cara Bassi 25/05/23
Joanne Veal 15/03/23
Abigail Boardman 29/01/23
Sue Burrows 10/12/22
Can these tiles be put on laminate flooring
Our advice: No, these tiles would need to be installed onto a solid substrate.
We are thinking of using these as wall tiles in a bathroom. The lower half will be tiled and the upper part painted. What black/grey tile trims would be a best fit with these tiles? Does the metropolis range have bespoke tile trims for tile edges and corners?
Our advice: We do not stock tile trim. We would advise using a 11-12mm trim.
What is the size of one tile?
Our advice: Each tile is 450x450 in size
What size spacers do you recommend?
Our advice: We would advise using a 3mm spacer.
Can I use these to tile a hearth for a 12kw multi fuel burner?
Our advice: These tiles would be suitable providing the heat does not exceed 90 degrees.
Hello. What plain tiles (grey, white, a light colour) could I add with these but keeping the tile height of 450mm matching as best as possible? The length could be the same or preferably longer. I can think of Stockholm white/grey Ceramic Matt floor tile OR Talent Grey Porcelain floor tile. Also, would it be ok to mix ceramic with porcelain? Many thanks
Our advice: Other than the tiles you have mentioned there would be no further tiles that we could offer that meet the specifications you have outlined. In terms of laying a Porcelain tile on the floor and combining this with a Ceramic wall tile, this is quite normal and will cause no issues.
Can these tiles be used outside?
Our advice: These tiles would not be suitable for an exterior project.