> Authentic replication of Calacatta marble
> Realistic marbling and veining
> Hardwearing porcelain construction
> Rectified edges for cleaner grout joints
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles
*Suitable matting should be in place to absorb water splashes etcR10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
Anonymous 08/06/23
Verified Buyer
Andi Ndreu 03/05/23
Verified Buyer
Mircea Mocanu 24/12/22
Verified Buyer
James 12/11/22
Verified Buyer
Sampath Reddivari 10/11/22
Verified Buyer
Sampath Reddivari 10/11/22
Verified Buyer
Christine Culverwell 03/09/22
Verified Buyer
Nicola 25/08/22
Verified Buyer
Ann 11/01/23
Are they non slip & suitable for bathroom floors
Our advice: These tiles have an anti-slip rating of R10 and would be suitable for a bathroom installation.
Adam 27/11/22
Are these tiles suitable for outdoor? We have lots left over from an indoor installation.
Our advice: These tiles may be used for exterior projects providing they are installed onto a cured concrete base and adhered using exterior tile adhesive.
Helana 30/09/22
Are these slip resistant and if so, its rating?
Our advice: These tiles have an R10 anti slip rating. We would deem this best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances. The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
Jen Crunden 13/07/22
What thickness of adhesive would you recommend for these tiles on floors & walls? What trowel notch size would you recommend for these tiles on floors & walls?
Our advice: We would advise using a 10mm notched trowel to create a 5mm bed of adhesive.
John 06/05/22
Can these be put on walls
Our advice: They can, provided they are installed onto a cement backer board as a regular wall could not support the full weight of these tiles.
TS 13/04/22
What's the PEI rating on these?
Our advice: This is PEI 4.
Sam. 19/02/22
Can I use on both wall and floor?
Our advice: Yes, these tiles are suitable for both the wall and the floor as long as the wall is strong enough to bear the weight of the tile.