> Authentic, Mediterranean-style design
> Realistic encaustic patterns and faux distress lines replicate genuine Iberian tile style
> Hardwearing porcelain construction
> Randomised pattern combinations make for aesthetic variety
> Suitable for walls and floors
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles*Suitable matting should be in place to absorb water splashes etc
R10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
Are the tiles suitable for a wetroom
Our advice: They are suitable for the installation. We would just advise considering a tile with a higher anti-slip rating. Normally an R11 or above.
Hello, I'm interested in the Delft tiles. I noticed the Grey have a wear rating of 3, whereas the Blue version have a wear rating of 4. I just wanted to check this is correct - so the Blue are more hard wearing than the grey? Many thanks Chris.
Our advice: Yes, as strange as this sounds it is correct that these two tiles have different wear ratings.
Hi can I order a sample
Our advice: Yes, you can order either a cut or a full sample on our website. Please click on the sample button shown on the website. Alternatively, you can call us on 01782 223822
can these tiles be used as a decorative feature on an outdoor patio?
Our advice: Yes, they are suitable. We recommend getting a sample to ensure that they are suitable for you.
Clare P. 13/12/20
Is there a best tile cutter/wheel to use for these porcelain tiles, in order to cut a crisp edge. My tiler is struggling to achieve this (but may be his ability?) Many thanks
Our advice: We would recommend using a wet wheel cutter with a diamond blade. You must ensure that the tile is fully supported in order to achieve a crisp cut.
Clare P. 03/08/20
Can these tiles be adhered directly to the existing plastered & painted bathroom wall?
Our advice: Yes they can be fixed directly to the wall however we would recommend the use of a primer such as Primer G (SKU:020101) prior to fixing
Lara r. 30/05/20
I need to attach these to a concrete breeze block wall outside. What do I need to get to attach them with?
Our advice: This depends if you'd like a slow or fast setting adhesive. For a fast set, you would need to use Keraquick Grey Fast Setting Adhesive 20kg SKU: 012120UK and for a slow set Keraflex Maxi S1 Grey Slow Setting Adhesive 20kg SKU: 1202620