> Authentic replication of terrazzo-style flooring
> Durable porcelain construction
> Rectified edges for cleaner grout lines
> 10 variations of surface design
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles*Suitable matting should be in place to absorb water splashes etc
R10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
can these tiles be used on floors in wetrooms?
Our advice: We would advise considering a tile with a higher anti-slip rating. Ideally an R11 or above.
Can these be attached to a plastered wall?
Our advice: They can only be installed onto a wall if a cement tile backer board has been installed to support the full weight of the tile.
Is it possible to use these in floors of wet rooms?
Our advice: They can be yes. The only consideration would be the slip rating which for this tile is R9, ideally, we would suggest using a tile which holds an R11 rating or higher.
Hi do you guys ship to USA?
Our advice: We only ship within the UK I'm afraid.
Hi. I would like this tile for my floor? I would like to pick out one of the colours in the tile for my walls - to have as a plain tile. From my computer screen the colours could be red or blue. Do you have a match in any of your ranges?
Our advice: You could try pairing with our Village Royal Blue Wall Tiles SKU: 447075 or Linear Navy Blue Gloss Wall Tiles SKU: 435490.
Which grout is to be used for these tiles please?
Our advice: We would advise using Ultracolor Manhattan (Light Grey) 110 Flexible Grout 5kg SKU: 6011005A.
Can these be used inside a fireplace around a log burner?
Our advice: Yes, these tiles would be suitable providing the tiles are not subjected to any heat over 90 degrees.