> Authentic replication of Victorian style mosaics
> Hardwearing porcelain construction
> Suitable for interior and exterior use
> Natural matt finish
> Traditional black and white monochrome colouring
> Suitable for walls and floors
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles*Suitable matting should be in place to absorb water splashes etc
R10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
Flamur Palj 28/09/22
yonathan dital 16/01/22
Massimiliano U. 09/05/21
Vanessa M. 10/08/20
What adhesive would you recommend for these tiles on 6mm backer boards on floorboards?
Our advice: We would recommend using our Keraflex Maxi S1 White Slow Setting Adhesive 20kg SKU: 1202120.
Is epoxy grout recommended for these tiles being laid on the floor?
Our advice: We would advise using our Ultracolor Manhattan (Light Grey) 110 Flexible Grout 5kg SKU: 6011005A.
If these are laid on floor boards, should a backing board be laid first?
Our advice: Yes, we would advise installing a 6mm tile backer board first.
George Fit 26/08/22
Hi. Last question before I click the button and order... What size spacers will I need to keep the gaps even on this type of tile please? Tile Mountain are extremely helpful, great customer service! *****
Our advice: Thank you for your lovely feedback. We would advise using a 2mm spacer.
George Fit 26/08/22
Hi. I have two questions; 1. Does the Victoria tile format require the use of spacers when fitting? 2. What size edging trim would you recommend to accommodate the tile thickness and finish any facing tile edges?
Our advice: The tiles are fixed onto a mesh backing and so spacers would only be required around the perimeter of the tiles. We would advise using an 8mm tile trim.
George Fit 25/08/22
Hi. May I ask what adhesive you would recommend for laying Victoria mosaic onto a smooth concrete, external base please? The base will be suitably primed, prior to fitting.
Our advice: We would advise using our Adesilex P9 White Slow Setting Adhesive 20kg SKU: 005120.
Julius Bell 01/04/22
what grout do you recommend to lay thesae tiles with
Our advice: We would recommend using our Ultracolor Manhattan (Light Grey) 110 Flexible Grout 5kg SKU: 6011005A.