Tile Mountain

Key Features

  • > 90% Portland cement and sand construction
    > No loose aggregate or filler
    > Highest flexural strength and up to three times the compressive strength of competitive cement board
    > Easy to cut to any size: just score and snap
    > Clean cuts allow edges to align tightly
    > Less dust and debris when cut
    > Unique formulation with MouldBlock™ Technology provides outstanding mould and moisture resistance
    > Excellent heavy tile adhesion

Description

12mm HardieBacker Board 1200x800

51 reviews 51 reviews
In Stock
QTY
image
1200
445680
20.00 KG
800

Product Details

Product Guide

Key Features

  • > 90% Portland cement and sand construction
    > No loose aggregate or filler
    > Highest flexural strength and up to three times the compressive strength of competitive cement board
    > Easy to cut to any size: just score and snap
    > Clean cuts allow edges to align tightly
    > Less dust and debris when cut
    > Unique formulation with MouldBlock™ Technology provides outstanding mould and moisture resistance
    > Excellent heavy tile adhesion

Description

Customers also liked

Read More Reviews:

Q & A

Larry07/09/22
Can l use a sealant to it to attach a shower tray?Our Advice

We woudln't advise using a sealant as the only form of fixture.

JB23/04/21
Hi, I have just purchased some 6mm backerboard and have read conflicting advice on how to install it. Do I need to use any form of adhesive (or mesh tape) to install on T&G 18mm floorboards? At present I am only planning to use the 25mm backerboard screws I also purchased.Our Advice

You can just use the screws; however, if you wished, you could use a small amount of adhesive as well.

Rob11/03/20
Is it a good insulator, can I use it instead of thermal board for underfloor heating?Our Advice

HardieBacker boards are suitable for underfloor heating. They should always be placed between the structural timber floor and the heating element.

Tim18/12/19
Does the hardie backer need priming before adding tile adhesive?Our Advice

No - these boards do not need priming.

Tim16/12/19
Can these be used behind tiling a wall in a shower enclosure?Our Advice

Yes - these tiles will be suitable as they are water resistant.

Wazza26/11/19
hi looking to install these on bathroom walls, all are brick (plastered) which adhesive is best to use and which size screws/washers are best to use? Thank YouOur Advice

We wouldn't recommend using adhesive, we would only recommend using screws. We recommend a minimum of 2” x 4” wood studs or 20-gauge metal studs, which must be straight, properly aligned and spaced a maximum of 16” on center

Jon08/11/19
What Adheisive would you reccomend for installing Hardie 6mm boards over tongue and groove pre-routed chipboard (with spreader plates and UFH pipes installed? (shorturl.at/nzMZ0 for ref)Our Advice

We would recommend the Granirapid Grey 2 Part Kit

Read More Q & A:

Our customers love us!

4.7 Out of 5 Rated Excellent!