1 / 1
Keraflex Maxi S1 Grey Slow Setting Adhesive 20kg
Key Features
> Low dust/ easily workable
> Suitable for interior and exterior use
> Accommodates irregularities in substrate and tile
> Hardens with minimal shrinkage
Description
- SKU 1202620
- Colour Grey
- Suitable for Underfloor Heating Yes
- Weight 20.00 KG
- Coverage (SQM) 5
Product Reviews
Tony Bennett 26/10/23
Verified Buyer
clare caudy 10/07/23
Verified Buyer
Dejan 05/05/23
Verified Buyer
Alastair Dal ferro 12/03/23
Verified Buyer
Mike Warren 26/05/22
Verified Buyer
Colin H. 05/09/21
Verified Buyer
Janette M. 06/08/21
Verified Buyer
Guest 16/06/21
Verified Buyer
Q & A
Ask A Question
CarlB 14/09/22
Is this suitable for sticking tiles over tiles ?
Our advice: We wouldn't advise tilling onto tile, but where unavoidable, we would suggest using a primer such as our Eco Prim Grip Plus SKU: 1560005. We would then advise using a flexible adhesive. The Keraflex would be suitable.
Chris 19/07/22
I am installing some 800 x 400 External Porcelain pavers directly on solid concrete. Is this the product I am looking for?
Our advice: You could use this adhesive or Adesilex P4 Grey Floor Adhesive 20kg SKU: 218220.
Alison 17/04/22
I'm taking on my first tiling task in my bathroom. I'm putting up xl flat metro 10x30cm tiles. Being a novice would you recommend that I use the slow setting adhesive? Also is this product fix and grout or purely adhesive? Many thanks in advance.
Our advice: We would advise using our Mapegrip D2 Ready Mix Adhesive 15kg SKU: 011715 and grouting with our Ultracolor Manhattan 110 Grout 2kg SKU: 6011002A. If you decided to go with the Keraflex please note this is solely an adhesive, not a grout.
Ray 14/04/22
Hi there Can you tell me if one 20kg bag would cover 12sq of wall tiles
Our advice: This bag will cover roughly 5m2.
Adam 15/06/21
We are laying the Dunsen tiles directly onto a concrete base. It is relatively flat beneath give or take a few mm over areas. What coverage will the adhesive give? If it was used at the maximum depth of 15mm what area would this cover? I am looking to cover myself worst case scenario. Thanks
Our advice: One bag will cover 1.111m2 if spread at a 15mm thickness.
Janet 22/10/20
Is this suitable for large ceramic tiles in a power shower enclosure (on aqua board)
Our advice: This adhesive will be suitable in a shower area
James 29/04/19
Can this be used to fix porcelain tiles on top of ceramic tiles - so "tile on tile" in a conservatory?
Our advice: The Adhesive would be fine to use with the tiles, however, if tiling on top of tiles you would need to use a primer before the adhesive to prevent slipping of the tiles. We do sell Eco Prim Grip Primer SKU# 1560005 that will do the job.