Tile Mountain

Key Features

  • > Water resistant and frost-proof once fully cured

    > Suitable for internal and external use

    > Can be used for adhesive bed up to 10mm thick

    > Suitable for use with underfloor heating

    > Fully offset residual CO2 emissions, supporting sustainable construction and renovation

Description

Keraquick Grey Fast Setting Adhesive 20kg

174 reviews 174 reviews
In Stock
QTY
image
012120UK
20.00 KG
Grey
5
Yes

Product Details

Product Guide

Key Features

  • > Water resistant and frost-proof once fully cured

    > Suitable for internal and external use

    > Can be used for adhesive bed up to 10mm thick

    > Suitable for use with underfloor heating

    > Fully offset residual CO2 emissions, supporting sustainable construction and renovation

Description

Customers also liked

  1. Mapei Ceramic and Quarry Wall and Floor Adhesive 20kg

    Mapei Ceramic and Quarry Wall and Floor Adhesive 20kg

    Size:20 Kg

    £14.95

    13
    VIEW
  2. Wood and Laminate Adhesive 500ml

    Wood and Laminate Adhesive 500ml

    £5.96

    Was £ 7.95 | Save 25%

    0
    VIEW
Item 1 of 6
Read More Reviews:

Q & A

Craig 17/11/22
Can this be applied to an external screed that has not thoroughly dried due to rain Our Advice

No, the screed would need to be fully cured prior to applying this adhesive.

Mr roberts12/06/22
How many bags will I need for 25sqmOur Advice

You would roughly require x5 bags. If you require a particularly thick layer more bags would be required.

Saf06/03/22
I have a recently screeded floor about 2 months ago with wet underfloor heating. Using 880x240 tiles SKU: 441240, would Mapeker Rapid Set FlexTile Adhesive be suitable? Thank youOur Advice

You could use the Mapeker Rapid set but Keraquick Grey Fast Setting Adhesive 20kg would be a better choice.

Darren04/03/22
Csn this be used to put ceramic tiles on a epoxy resin floorOur Advice

No, this would not be advisable. The Epoxy resin would need to be removed.

Neil15/02/18
can this be used to adhere split faced slate tiles to a plasterboard substrate?Our Advice

The Keraquick Grey Fast Setting Adhesive 20kg is suitable to use with split faced slate tiles on a plasterboard substrate.

Sean13/03/17
Would the adhesive be ok to use on a painted concrete base or would the paint need sanding off?Our Advice

We would always recommend to remove the paint where possible to ensure that the adhesive can bond with the wall. Where this is not possible, it would be best to sand the wall to remove as much paint as possible.

Sandy16/01/17
Is this the right adhesive to be used on wall tiles in shower.Our Advice

Hi, Yes Keraquick Grey Fast Setting Adhesive 20kg is suitable for walls in the shower area, we would recommend using the shower between 24 - 48 hours after installation.

Read More Q & A:

Our customers love us!

4.7 Out of 5 Rated Excellent!