1 / 1
Mapei Ceramic and Quarry Wall and Floor Adhesive 20kg
Description
Make sure the bond between your tiles and your substrate is a lasting one with this Ceramic & Quarry Wall & Floor Adhesive from Mapei, the world’s number one manufacturer of grout and adhesive.
Key Features
-
Cement-based
-
Interior and exterior use
-
Suitable for use with gypsum plaster, cement, concrete, and screeds
-
High bond strength
-
For use with ceramic and quarry tiles
Adhering ceramic and quarry tiles to all manner of substrates including gypsum plaster, cement, concrete, and screeds has never been easier thanks to Mapei Ceramic & Quarry Wall & Floor Adhesive. A grey cement-based powder adhesive, Mapei Ceramic & Quarry Wall & Floor Adhesive is suitable for the installation of a wide range of ceramic tiles and mosaics as well as for quarry tiles. Suitable for use in kitchens, bathrooms, utility rooms and on balconies. Tiles can be grouted after approx. 24 hours Poor drying conditions may extend this time. We would recommend this adhesive to be used with tiles up to 450mm x 450mm. This adhesive is not suitable for use with porcelain, natural stone or quartz tiles.
- SKU 436525
- Colour Grey
- Weight 20.00 KG
- Suitable for Underfloor Heating Yes
- Coverage (SQM) 5
Product Reviews
Q & A
Ask A Question
Retep 27/05/22
Can i tile over existing tiles
Our advice: We would not advise tiling over an existing project.
RICHARD 27/07/17
WOULD THIS BE OK TO USE FOR A TERRACOTTA TILE ONTO T&G CHIPBOARD
Our advice: You would need to use a Latex based adhesive to tile onto T&G chipboard, we recommend Keraquick White Fast Setting Adhesive 20kg (SKU 012520) along with Latex Plus 6kg (SKU 215106UK) on a 1:1 ratio.
Kelvin 11/07/17
Can this adhesive be used for grouting, or can you tell me what type I need for quarry tiles
Our advice: The Mapei Ceramic and Quarry Wall and Floor Adhesive 20kg (SKU 436525) is not suitable for grouting. We would recommend using Ultracolor Cement Grey 113 Flexible Grout 5kg (SKU 6011305A) for Quarry tiles.
Dan 11/04/17
Is this product suitable for porcelain tiles to be fitted on an interior concrete floor? Thanks
Our advice: The Mapei ceramic and quarry adhesive is only suitable for Ceramic tiles and Quarry tiles; we would recommend using either Mapeker (SKU: 012320) or Keraquick (SKU: 012120UK).
Kay 24/11/16
Typically how long does this take to dry and then be able to walk on the tiles
Our advice: The Mapei ceramic and quarry adhesive takes approx 24 hours to dry and you would be able to walk over the tiles after this time.
Daz 18/10/16
What depth can be achieved with this adhesive?
Our advice: This can be applied of a thickness of up to 5mm.
Pete 30/03/16
Can you recommend an adhesive to bond porcelain tiles to concrete on an out door veranda?
Our advice: Thank you for the question, we would suggest the Keraquick or Keraflex Maxi adhesive.