> Durable porcelain construction
> Large format means fewer tiles used and fewer grout lines
> Shining polished finish
> Suitable for interior floors
> Rectified edges for seamless look
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles
*Suitable matting should be in place to absorb water splashes etcR10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
Dominic Smart 10/05/23
Verified Buyer
Ajith 20/11/22
Verified Buyer
Qusay Abeed 20/11/22
Verified Buyer
louise redman 24/04/22
Verified Buyer
Paresh Patel 17/04/22
Verified Buyer
Jason T. 18/05/21
Verified Buyer
Pamelia M. 15/02/21
Verified Buyer
Jane K. 29/01/19
Verified Buyer
Leila Hibbert 03/06/22
Hello, lounge black polisched porcelain floor tile are very nice I need them aswell in white with marble effect 600x600 but I can't find any with the thickness of 10.5mm? We like to have it as chequerboard. Thank you Leila
Our advice: I am sorry we have nothing suitable to pair with the Lounge black.
Joshi 28/05/22
Hi, can these tiles been used for outside, if yes want would the installation process be I.e onto wet mortar bed or sand base? These polished tiles look very slippery when wet? Many thanks
Our advice: It would not be advisable to install these tiles outside due to the slip hazard when wet. If you wanted to go ahead knowing this they would need to be installed onto a cured concert base and adhered with an exterior tile adhesive.
Matt 13/05/21
Can these be used for underfloor heating (water)?
Our advice: Yes, they are suitable.
sue 21/05/20
could i use these tiles for a hearth.
Our advice: Yes, you could. These tiles will require sealing. I would like to recommend for this Fila MP90 (Product Code 436195).
Michelle 28/01/17
Do these tiles come pre sealed?
Our advice: The Lounge Black Polished Porcelain tiles do have a factory seal which is designed to protect the tiles during transit and installation, so we would recommend to re-seal the tiles using the Fila MP90 Polished Porcelain and Stone Sealer (SKU: 430670) after installation and then every 2-3 years after.