Creating an urban inspired floor doesn't have to cost the earth thanks to our Metal Rectified range - a stunning collection of wall and floor tiles that are the pinnacle of industrial chic.
Hardwearing porcelain construction
An absolutely stunning example of the robust, aged industrial look that’s so on trend right now, Metal Rectified brings the sought-after weathered alloy aesthetic to a series of hardwearing porcelain wall and floor tiles. Featuring a metallic-like surface design and shimmering rust effects that effectively simulate the oxidisation of worn metal surfaces, these eye-catching tiles look great when paired with Edison bulbs, exposed electrical trunking and brass decal elements.
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles*Suitable matting should be in place to absorb water splashes etc
R10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
Would these tiles be suitable for behind a log burner.
Our advice: Yes, provided these tiles do not exceed 90 degrees.
Are these tiles okay in a wetroom/shower?
Our advice: These tiles would be suitable for the walls of a wetroom. For the flooring, we would encourage a higher anti-slip rating. Ideally, an R11 or above.
Can these tiles be used in a wet room/shower?
Our advice: They can be used for the walls of a wetroom, but ideally, for the flooring, a higher anti-slip rating R11 or above should be used.
Afternoon, Do these tiles need a plasterboard where the bathroom wall is timber.? Regards David
Our advice: We would advise using a plasterboard to ensure that the wall is strong enough to take the weight of the tiles.