JavaScript seems to be disabled in your browser. You must have JavaScript enabled in your browser to utilize the functionality of this website.
You've already added this type of sample to your basket, heres some other suggestions we think you might like...
You've already added this type of sample to your basket..
01782 223822
Primer G 1kg
“Our pallets are delivered to the kerbside. Watch the video to find out more.”
Over 50 In Stock
Quantity required:
Add these extras for:
£
Looks like you're trying to order more tiles than we currently have in stock.
Get your walls and floors in tip-top condition ahead of tiling with Primer G, a water-based synthetic resin from Mapei, the world’s number one manufacturer of grouts and adhesives.
Key Features
Easy to apply with brush or roller
Low VOC
Water based
Drying time 2 hours
For use on absorbent substrates such as screed, plasterboard
Mapei Primer G is a water-based dispersion of special synthetic resins which, once applied to any surface, dry to form a flexible, compact, shiny coating to consolidate the surface. Primer G also improves the adhesion of smoothing compounds, paint, wallpaper adhesive, tile adhesives and mortar for renders. Primer G applied to the surface of gypsum or cement prevents any chemical reaction between sulphates and the cement alluminates of the tile adhesive which, in the presence of moisture, leads to the formation of the salt '’ettringite’ the accumulation of which causes tiles to break away from gypsum substrates.
CUT AND FULL TILE SAMPLES
FREE*
ORDERS OVER £150*
FREE
*to most mainland UK postcodes
Q : I'm going to have bathroom walls plastered + skimmed before tiling. When should this primer be applied? Would it be applied to the fresh plaster (once dry) and then adhesive + tiles afterwards?
The Primer G can be applied once the plaster has dried. The Primer G 1KG covers up to 10m2 when applied neat and up to 30m2 when diluted. The tiles can be installed with adhesive and grout 2-3hrs after the application of the primer.
Q : Hi can I use this product to seal wbp ply on my bathroom floor prior to tiling it?
Primer G 5kg (SKU 020105) can be used to prime plywood, however, this is not necessary as plywood would not generally absorb moisture as readily as concrete would.
Q : Hi I am about to tile a bath area which has painted plaster board if I prime using this primer will the tiles be ok?
We would recommend removing as much paint as possible before using our Primer G, as you would be tiling onto the paint, not the plasterboard.
Q : Do I need to prime bare plasterboards before tileing
When tiling onto plasterboard, a primer not required unless this has been skimmed with plaster. If you are using plasterboard in a bathroom area or wet areas, we would recommend using a waterproofing kit (SKU: 1248KITUK) before installing tiles.
Q : hi i am looking to lay porcelain tiles to a kitchen floor which is concrete, should i seal with this first pior to laying tiles?which type of adhesive would you advise?
Your concrete surface will require sealing if it is relatively new if it is over 5 years old it will not be needed. The adhesive required will depend on the tile you have chosen Keraquick Flexible is always a preferred choice, However, once you have added the tiles to the basket and proceed to the next page on the website it will advise the adhesive and grout you will require for your project.
Items 1 to 5 of 10 total
Items 1 to 5 of 15 total
£17.99
© 2019 Tile Mountain Ltd.
