01782 223822

Keraquick White 20kg
  • 37 Reviews
View Questions & Answers

Keraquick White Fast Setting Adhesive 20kg

  • SKU:
    012520

In Stock

£24.99
Product Details

A quick job doesn’t always mean a poor job and this is especially true of Mapei Keraquick, a quick setting flexible cement-based powder adhesive from the world’s number one manufacturer of adhesives and grout.

Key Features

  • Water resistant and frost-proof once fully cured

  • Suitable for internal and external use

  • Can be used for adhesive bed up to 10mm thick

  • Available in two colour variants: White / Grey

  • Suitable for use with underfloor heating

Suitable for use with ceramic, porcelain, glass tiles, mosaics and non-moisture sensitive natural stone tiles (thicknesses of adhesive up to 10 mm), Mapei Keraquick offers a hassle free solution for bonding tiles to all manner of substrates including cement screeds, cement-based renders, and cured concrete. Can be used with ceramic tiles of every type and even stone-based materials that are not extremely sensitive to moisture. Best of all, this fast-setting S1 flexible adhesive is ready for grouting after just 2-3 hours and is water-resistant and frost proof once fully cured. Team with Mapei Latex Plus to create an S2 fexible adhesive.

Product Details

A quick job doesn’t always mean a poor job and this is especially true of Mapei Keraquick, a quick setting flexible cement-based powder adhesive from the world’s number one manufacturer of adhesives and grout.

Key Features

  • Water resistant and frost-proof once fully cured

  • Suitable for internal and external use

  • Can be used for adhesive bed up to 10mm thick

  • Available in two colour variants: White / Grey

  • Suitable for use with underfloor heating

Suitable for use with ceramic, porcelain, glass tiles, mosaics and non-moisture sensitive natural stone tiles (thicknesses of adhesive up to 10 mm), Mapei Keraquick offers a hassle free solution for bonding tiles to all manner of substrates including cement screeds, cement-based renders, and cured concrete. Can be used with ceramic tiles of every type and even stone-based materials that are not extremely sensitive to moisture. Best of all, this fast-setting S1 flexible adhesive is ready for grouting after just 2-3 hours and is water-resistant and frost proof once fully cured. Team with Mapei Latex Plus to create an S2 fexible adhesive.

Information Breakdown
SKU
012520
Colour
White
Reviews
F
FAO S.  Verified buyer
26/04/17
Excellent Service
I placed an order with Tile Mountain, which was easy to do, the staff were most helpful on the amount of grout etc needed. On delivery, several tiles were broken, and within two days these were replaced. Faultless Service. I would highly recommend.
L
Liesl G.  Verified buyer
24/04/17
fabulous
Another purchase that was as good as the first. Brilliant, really pleased with the product and the service. Such a refreshing change from other retailers!!
C
Christopher H.  Verified buyer
21/03/17
Quartz tiles
Excellent quality from an excellent company
S
Sean J.  Verified buyer
12/03/17
Good stuff
Good stuff
G
Guest  Verified buyer
11/03/17
NIce tile awful 3rd party
NIce tile awful 3rd party delivery. Never again

Items 1 to 5 of 37 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 8

Ask a question

POST

Questions and Answers

ASK A QUESTION
N
Nicky. Verified buyer
02/10/17

Q : Hi! We have extended our kitchen and shall be ordering the Hellas Marble floor tiles. The new extension obviously has a new screed floor which will have been laid down for approx. 3 weeks but we shall be using a specialist green adhesive for this, the old kitchen floor under the lino has concrete. Is this adhesive ok for the old concrete floor and will the green screed adhesive (which i believe is grey) be ok to use with the Hellas tiles? Our floor guy said it will be fine as we are using porcelain tiles and not natural stone. Thank you!

Answers (1)
Advice

The Keraquick White fast setting adhesive is perfectly suitable for use on top of an old concrete floor with the Hellas Marble tiles. However, if the extension flows into the kitchen and this will then become 1 floor area, we would strongly advise that you use the same adhesive for both parts as it would not be recommended to use 2 adhesives for the same area as these may not perform at the same levels

F
FB. Verified buyer
26/04/17

Q : I have a 600 x 300 matt white ceramic wall tiles. They will be applied directly to plaster board and skimmed walls. Please can you advise on a adhesive and grout (white)?

Answers (1)
Advice

We would recommend using either the White Keraquick Fast Setting Adhesive SKU 012520 or our Adeslex P9 White Slow Setting Adhesive SKU 005120 Also, we would recommend using our Ultracolor White Grout SKU 6010005A.

M
Mike. Verified buyer
30/01/17

Q : Hi, if I'm ordering polished super white porcelain tiles is there a specific need for white adhesive as opposed to the grey?

Answers (1)
Advice

You are able to use grey adhesive with a porcelain tile, however, we would always recommend using white adhesive with a lighter coloured tile especially if a lighter coloured grout is being used.

V
VWills. Verified buyer
09/11/16

Q : Hi I have a 31sq/m area to cover with 600x600 tiles. How many bags of adhesive would I need?

Answers (1)
Advice

One bag of the Keraquick will cover approximately 4sqm for a floor and 8sqm for a wall. For a floor, you would need 8 bags. For a wall, you would need 4 bags.

J
Jill. Verified buyer
01/11/16

Q : Will 1 bag of Keraquick white adhesive cover 19 sq mtrs ?

Answers (1)
Advice

1 bag will cover approximately 5sqm. For 19sqm, we would recommend 4 bags for the project.

Items 1 to 5 of 7 total

  1. 1
  2. 2
To top

Please wait...

Continue shopping View Cart and Checkout
Continue shopping or View Cart and Checkout