> Faithful replication of weathered concrete
> On-trend industrial aesthetics
> Hardwearing porcelain construction
> Matt finish
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles*Suitable matting should be in place to absorb water splashes etc
R10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
FARID ZENATI 13/06/23
Tina Eyre 06/06/23
Linn Williamson 20/05/23
Darren Wood 10/05/23
Can these tiles be installed using the suspended system shown in the video? Thanks
Our advice: No, only our 20mm slab can be installed using the pedestal system. These tiles would need to be installed onto a solid base. Please note if you plan to install them externally they need to be installed onto a cured concrete base and adhered using an exterior tile adhesive.
What size grout joints are recommended for exterior use?
Our advice: We would recommend using a 5mm grout joint. Please bear in mind these tiles would need to be installed onto a cured concrete base and adhered with an exterior tile adhesive.
Would these tiles be suitable to go round a swimming pool?
Our advice: We would advise using a tile no less than an R12 slip rating.
I was planning on laying these on hardcore base and then fixing them in with cement. Is this possible?
Our advice: This method of installation would not be suitable. The tiles need to be installed onto a cured concrete base and adhered with an exterior tile adhesive.
I want to use these tiles for a patio . I intend to erect a pergola so would need to attach pergola posts to the patio via screws on brackets. Would that be possible on these tiles?
Our advice: As this is predominately an interior tile that can be used outside this would not be suitable in terms of supporting the structure. There will be no problem drilling into the tile we just could not guarantee the weight of the Pergola would be sufficiently secure/supported. We would advise checking out our outdoor slab range which comprises a range of 20mm tiles.
Do you deliver out of area? Family member is interested... lives in Burton-on-Trent.
Our advice: Yes, we deliver to Burton-On-Trent.
Hello, what is the Water absorption rating for these tiles?
Our advice: This tile has less than 0.5% water absorption rate.