> Slip resistant and suitable for both interior and exterior use
> Realistic natural stone effect
> Contemporary aesthetics
> Hardwearing porcelain construction
> Beautiful matt finish
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles
*Suitable matting should be in place to absorb water splashes etcR10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
Anonymous 11/09/24
Verified Buyer
Clare Dodman 13/08/24
Verified Buyer
Peter 23/03/24
Verified Buyer
Lorraine Patrick 28/02/24
Verified Buyer
Anonymous 31/10/23
Verified Buyer
Erica 13/09/23
Verified Buyer
Bita Bozorgmehr 29/08/23
Verified Buyer
Robert Mayle 18/08/23
Verified Buyer
Ade Edwards 26/03/23
Do these tiles come in half sizes
Our advice: No, this is the only size we do in this tile range
Monika 19/07/23
Kindly recommend grout for this tiles.
Our advice: We would recommend using the Ultracolor Golden Dust 135 Flexible Grout (sku 6013505A) with this tile.
Julie 20/02/24
Are they a riven finish as state non slip but they look smooth finish on the photo. I need non slip so just checking thanks
Our advice: These tiles are not Riven but do hold a high anti-slip rating of R11.
Alex 05/04/24
I am about to purchase 600x600x9.5mm porcelain tiles to be laid outside on a concrete surface, the finish height for the tiles needs to be 20mm above the concrete floor needing a 10.5mm bed. What is the best to use, sand and cement or mapei adhesive using a 10mm notched trowel?
Our advice: We would advise using our Adesilex P4 Grey Floor Adhesive 20kg SKU: 218220. To achieve a 10.5mm bed we would advise using a 20mm notched trowel.