> Faithful reproduction of genuine Statuario marble
> Contemporary aesthetics
> Hardwearing porcelain construction
> No post installation sealing required
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles*Suitable matting should be in place to absorb water splashes etc
R10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
Charanjit Singh 20/06/23
b- duncan2 10/05/23
Craig Eric Kearney 31/03/23
Anthony Simpson 24/01/23
Irene Cunningham 08/01/23
edwin benson 29/12/22
Are these ok for shower walls?
Our advice: They can be installed in a shower enclosure but would require additional support from tile backer boards. Please also note these tiles do require sealing. We would advise using our MP 90 - 1 Ltr - Water and Oil Repellent Protection SKU: 430670.
What grout would you recommend with these tiles please?
Our advice: Any of our Keracolor grouts can be used with these tiles. I would suggest a pale grey or white.
Joe Jordan 07/11/22
Does this tile have a RAL number? So we can get the silicone to match
Our advice: We are sorry a RAL number would not be referenced on the manufacturer's data sheets.
What's the thickness of Barbados White Marble Effect Wall and Floor Tiles? Thanks
Our advice: These tiles are 8mm thick.
Are these suitable for a wet room and walk in shower?
Our advice: Technically they would be suitable for the project. We would just advise perhaps considering a tile with a higher anti-slip rating.
Tracey Kemp 19/08/22
Hello, I’ve ordered a sample of the Barbados white marble effect floor tile. The sample (thank you for sending me a few different samples) looks more creamy than the tile does on the picture on you website. Can you tell me if it is a pure white please? Many thanks, Tracey Kemp.
Our advice: As it can be difficult to show exactly what our tiles look like in person we would advise using the sample issued as the best representation of the colour of our Barbados tile.
Tina H 08/03/22
I’d like to install these tiles on the floor of my kitchen, which is screeded, roughly 16m2, how much and what type of adhesive should I order?
Our advice: Your would need x3 bags of our Keraflex Maxi S1 White Slow Setting Adhesive 20kg SKU: 1202120.