> Contemporary aesthetics
> Durable porcelain construction
> Popular rectangular form-factor
> No post-installation sealing required
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles*Suitable matting should be in place to absorb water splashes etc
R10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
James Morrison 04/05/22
Martin H. 26/03/21
Please can you give instructions as to what best to lay these on and anything else we need to know like sealing them etc
Our advice: It would be best to lay the tiles onto a cured concrete base and adhere them with our Keraquick Grey Fast Setting Adhesive 20kg SKU: 012120UK. For grouting, we would advise using Ultracolor Cement Grey 113 Flexible Grout 5kg SKU: 6011305A. Alternatively, if you'd prefer not to install a concrete base, you could use our Norcros Rock Tite System, which comprises of a Primer, Adhesive and Brush in grout. All three would need to be used as specified by Norcros in order for the installation to be guaranteed. This would allow you to then install onto a hardcore base. You can find detailed instructions regarding the installation by opening the datasheet shown in the product details Norcros Rock-Tite Porcelain Primer 15kg SKU: 451475
Hi, I ask again, do these tiles need to be sealed? Thanks
Our advice: These tiles do not require sealing. If you wanted to protect them, you could use our LTP Porcelain Tile Protector - Pre Grout Treatment Interior & Exterior Use SKU: LTP391. Please note this is not an essential requirement.
Hello do these tiles need to be sealed as they are porcelain?
Our advice: These tiles do not require sealing.
Hi, are these ready to go onto concrete & sand please?
Our advice: These tiles are not suitable for installing onto concrete and sand. They would need to be installed using either a cured concrete base and adhered with an exterior adhesive or onto a hardcore base and adhered using our Norcros Rock Tite System.
David Smith 20/05/22
Hello, Can the 900 X 600 tiles be laid in stretcher bond (staggered) pattern using pedestals?
Our advice: A brick bond installation would not be suitable for our pedestal system.