> Contemporary aesthetics
> Authentic replication of natural sandstone
> Durable porcelain construction
> Semi-Polished finish
> Rectified edges for minimal grout joints
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles*Suitable matting should be in place to absorb water splashes etc
R10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
Margaret Gould 06/08/22
Margaret Gould 01/08/22
sam fitzgerald 20/06/22
Katrin Hovanessian 28/03/22
Michael Henry 14/03/22
Sallyann Nicholls 17/01/22
Does this tile come in 900x900mm?
Our advice: This tile is only available in 600x600mm.
What is wearing rate?
Our advice: Wear/PEI categorisation primarily defines the durability of ceramic and porcelain tiles tested. The process of designating a PEI rating however involves testing the surface wear layer of a tile’s enamel glazing only; it does not measure the fracture strength of a tile or assign any kind of slip-resistance rating (that’s done using an entirely different kind of scale).
Can you use these on walls as well? For instance in a shower.
Our advice: We wouldn't advise doing so. A better choice would be a tile with a Gloss finish as opposed to a Polished.
What adhesive is best for these?
Our advice: We recommend using our Keraquick Grey rapid set adhesive for these tiles (SKU: 012120UK). However, we would suggest firstly checker with your fitter for their requirements and recommendation for the project.
Do you need to apply a sealant to these tiles?
Our advice: These don't require sealing.
Our advice: These tiles are not anti-slip
suitable for under floor heating?
Our advice: Yes these can be used with underfloor heating