> Authentic concrete effect
> Hardwearing porcelain construction
> No sealing required
> Matt finish
> Rectified edges for cleaner grout lines
R9 - Best used in dry indoor areas: Bathrooms*, kitchens*, hallways*, living rooms, bedrooms and studies.
Generally, smooth surface gloss or matt tiles which can produce a slip hazard when wet, as a shoe may slide over the tiles*Suitable matting should be in place to absorb water splashes etc
R10 - Best used in indoor or outdoor areas where there may be minimal wetting remaining on the surface: Bathrooms, kitchens, hallways, food courts, and commercial areas with external entrances.
The tile surface will generally be a textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface.
R11 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios.
The tile surface will usually be a heavier textured matt glaze, sometimes with a slight surface structure, designed to prevent shoes from sliding over their surface. Designed for both indoor and outdoor areas, where there can also be the presence of other surface contaminants, such as liquid soaps and leaf debris.
R12 - Best used in areas which may be subject to heavy wetting of the surface: Wetrooms, exposed balconies, patios, swimming pool surrounds, factory production lines, vehicle inspection pits
The tile surface will often have deep recesses to drain water and other liquid contaminants from the raised surface areas.
R13 - Best used in areas which may be subject to heavy wetting of the surface combined with other contaminants, steps or ramps: Commercial swimming pool and spa surrounds, Factory production lines, vehicle inspection pits
The tile surface will have very deep recesses to drain water and other liquid contaminants, such as oils from the raised surface areas and are designed for commercial areas including industrial process areas where there is dangerous equipment present
Do these work as wall tiles too?
Our advice: Yes, so long as the wall is installed with a backer board first.
We have just laid the tiles in our new kitchen and we find they are a bit too rough for mopping as it tears the mob head and the tiles can also scratch fairly easy. To aid this we are thinking of applying a sealer, can you please advise if this will be ok with these tiles? I understand the description says no sealer required, but would it damage the tiles if we did? I'm hoping the sealer makes the floor slightly easier to mop and reduces its tendency to scratch.
Our advice: We would not advise using any sealers on the tiles however LTP Porcelain Tile Protector - Pre Grout Treatment Interior & Exterior Use can be used. Ensure that the tiles are cleaned before applying this to the tiles.
Pls can you recommend best grout to use with these tiles
Our advice: We would advise using our Ultracolor Manhattan (Light Grey) 110 Flexible Grout 5kg SKU: 6011005A.
Are these suitable for outside?
Our advice: Yes, they would be providing you are installing them onto a cured concrete base and adhering with an exterior tile adhesive.
Is underfloor heating suitable for this tile? thanks.
Our advice: Yes, underfloor heating would be suitable to use with our Dunsen tiles.
Do thread come in a 20mm outside version?
Our advice: No.
I am intending using these tiles indoor and out, and appreciate that they will be laid differently. I also want to use them on 3no. steps from my terrace and propose to overhang the tread by 15mm over the riser. The tiles should be strong enough to withstand a 15mm overhang and not break off?? Appreciating your advice. Many thanks.
Our advice: This tile would not be suitable. For the installation, you have advised a 20mm thick tile would be required.